Sick IME2S12-04N4DC0

Proximity safety switch

Sick IME2S12-04N4DC0

Datasheet:

• Article: 1091946
• Sensor operating principle: Inductive
• Number of safe outputs: 2
• Housing diameter: M12
• Sensing distance S_n: 4 mm
• Safety switching distance S_ao: 3.2 mm
• Safety switching distance S _ar: 6 mm
• Active touch surfaces: 1
• Starter frequency: ? 100 Hz
• Reliability class: SIL2 (IEC 61508 ), SILCL2 (EN 62061),
• Category: Category 2 (ISO 13849-1)
• Performance level: PL d (ISO 13849-1)
• PFHd (average probability of dangerous failure per hour): 6.0 x 10^-8 (IEC 61508)
• T_M (specified operating time): 20 years (ISO 13849-1)
• Design type: Design type 3 (ISO 14119-1)
• Starter coding degree: Uncoded (EN ISO 14119)
• Safe state in the event of an error: At least one safety semiconductor output (OSSD) is in the AUS state (OFF).
• Reliable daisy chaining: With Flexi Loop (with diagnostics)
• Connection type: M12 connector, 4-pin.
• Diagnostic display: ?
• Status display: ?
• Protection class: III (IEC 61140)
• Rated insulation voltage U_i: 28.8 V
• Maximum permissible impulse voltage U_imp: 1,500 V
• Supply voltage U_V: 24 V DC (19.2 V DC ... 28.8 V DC)
• Current consumption: ? 20 mA
• Output type: Semiconductor outputs (OSSD) with self-monitoring
• Rating: ? 1 ms
• Unlocking time: ? 1 ms
• Risk time: ? 20 ms
• On delay: ? 1 s
• Case type: Cylindrical
• Case diameter: M12
• Case length: 65 mm
• Usable thread length: 36.9 mm
• Mounting: With projecting part
• Protection type: IP67 (IEC 60529)
• Operating range temperature: –25 °C ... +70 °C
• Storage temperature: –25 °C ... +70 °C
• Relative humidity: 50%, at 70 °C (IEC 60947-5-2)
• Vibration resistance: 10 Hz ... 55 Hz, 1 mm (IEC 60947-5-2)
• EMC: IEC 60947-5 -2, IEC 60947-5-3, IEC 61000-6-7,
• Housing: Nickel-plated brass
• Sensing surface: VISTAL®

• Series:IME2S
• Category:Proximity safety switches
• Sensing distance: 4
• Output type: semiconductor
• Type of connector:M12
• Type of connection< /strong>:connector