Sick IME30-38NPSZC0S

Inductive proximity sensor

Sick IME30-38NPSZC0S

Datasheet:

• Article: 1071309
• Case type: Cylindrical with thread
• Case design: Standard
• Thread size: M30 x 1.5
• Diameter: Ш 30 mm
• Sensing distance S_n: 38 mm
• Sensing distance ensured S_a : 30.78 mm
• Mounting: With protruding part
• Switching frequency: 100 Hz
• Connection type: M12 connector, 4-pin
• Switching output: PNP
• Output function: Normally open
• Electrical version: DC. current, 3-wire
• Protection type: IP67
• Special properties: Triple sensing distance
• Supply voltage: 10 V DC ... 30 V DC
• Residual ripple: ? 10%
• Voltage drop: ? 2 V
• Current consumption: 10 mA
• Ready delay: ? 200 ms
• Warm-up time: 90 s
• Hysteresis: 1% ... 15%
• Reproducibility: ? 5%
• Temperature deviation (from S_r): ± 10%
• EMC: According to EN 60947-5-2
• DC current I_a: ? 200 mA
• No-load current typ.: ? 10 mA
• Short circuit protection: ?
• Polarity inversion protection: ?
• Suppression of the switching pulse: ?
• Shock and vibration resistance: 30 g, 11 ms/10 Hz ... 55 Hz, 1 mm
• Operating temperature range: –25 °C. .. +75 °C
• Storage temperature range: –25 °C ... +75 °C
• Case material: Brass, nickel-plated
• Material , active surface: Plastic, PA 66
• House length: 71 mm
• Usable thread length: 41 mm
• Max. tightening torque: ? 70 Nm
• Supply contents: Fastening nut, brass, nickel-plated (2 pcs.)
• UL file no.: NRKH.E181493
• MTTF< sub>D: 1.735 years
• DC_avg: 0 %
• Note: Values are indicative and subject to change
• Steel St37 (Fe): 1
• Stainless steel (V2A): Approx. 0.77
• Aluminum (Al): Approx. 0.44
• Copper (Cu): Approx. 0.37
• Brass (Ms): Approx. 0.46
• Note: For relevant graphic materials, see section. “Installation instructions”
• A: 80 mm
• B: 180 mm
• C: 30 mm
• D: 114 mm
• E: 35 mm
• F: 380 mm
• Series:IME
• Sensing distance: 38 mm
• Output type: PNP
• Installation: with protruding part
• Housing type: cylindrical with thread
• Output signal function: NC