Sick IMM05-0B8NSVR8S

Inductive proximity sensor

Sick IMM05-0B8NSVR8S

Datasheet:

• Article: 1108732
• Housing type: Cylindrical with thread
• Housing design: Standard design
• Thread size: M5 x 0.5
• Diameter: Ш 5 mm
• Sensing distance S_n: 0.8 mm
• Sensing distance ensured S_{a< /sub>: 0.648 mm}
• Mounting: Flush
• Switching frequency: 5,000 Hz
• Connection type: Cable with M8 connector, 3-pin, 0, 2 m
• Switching output: NPN
• Output function: Normally open
• Electrical version: DC. current, 3-wire
• Protection type: IP67
• Special properties: Visual adjustment aid
• Supply voltage: 10 V DC ... 30 V DC
• Residual ripple: ? 20%
• Voltage drop: ? 2 V
• Current consumption: 10 mA
• Ready delay: ? 10 ms
• Hysteresis: 1% ... 15%
• Reproducibility: ? 2.5%
• Temperature deviation (from S_r ): ? 10%
• EMC: EN 60947-5-2
• DC current I_a: ? 200 mA
• Material cable: Polyurethane
• Wire diameter: Ш 2.9 mm
• Short circuit protection: ?
• Polarity inversion protection: ?
• Suppression of switching pulse: ?
• Shock and vibration resistance: 30 g, 11 ms/10...55 Hz, 1 mm
• Temperature range during operation: –25 °C ... + 70 °C
• Case material: Stainless steel V2A, DIN 1.4305 / AISI 303
• Material, active surface: Plastic, LCP
• Case length: 25 mm
• Usable thread length: 23 mm
• Max. tightening torque: ? 1.5 Nm
• Supply includes: Fastening nut, stainless steel V2A (2 pcs.), Washer, stainless steel V2A, with locking gear (2 pcs.), Marking flag cable, Polymatic 50 (1 piece),
• UL File No.: NRKH.E348498
• MTTF_D: 1.662 years
• DC_avg: 0 %
• Note: Values are indicative and subject to change
• Steel St37 (Fe): 1
• Stainless steel (V2A): Ok. 0.72
• Aluminum (Al): Approx. 0.49
• Copper (Cu): Approx. 0.42
• Brass (Ms): Approx. 0.56
• Note: For relevant graphic materials, see section. “Installation instructions”
• B: 0 mm
• C: 5 mm
• D: 2.4 mm
• F: 3 mm
• Series:IMM
• Sensing distance:0.8 mm
• Output type:NPN
• Installation: flush
• Case type: cylindrical with thread
• Output function:NC