Sick IMS12-04BPSNU2S

Inductive proximity sensor

Sick IMS12-04BPSNU2S

Datasheet:

• Article: 1103181
• Case type: Cylindrical with thread
• Case design: Standard
• Thread size: M12 x 1
• Diameter: Ш 12 mm
• Sensing distance S_n: 4 mm
• Sensing distance ensured S_a: 3 ,24 mm
• Installation: Flush
• Switching frequency: 2,000 Hz
• Connection type: Cable, 3-wire, 2 m
• Switching output: PNP
• Output function: Normally open
• Electrical version: DC. current, 3-wire
• Protection type: IP68, IP69K,
• Special properties: Detergent resistant, Temperature resistance
• Special applications: Mobile work machines , Hygienic and high humidity areas, harsh operating conditions
• Supply voltage: 7.2 V DC ... 60 V DC
• Residual ripple: ? 10%
• Voltage drop: ? 2.5 V
• Current consumption: 10 mA
• Ready delay: 100 ms
• Hysteresis: 3 % ... 20 %
• Reproducibility: ? 2%
• Temperature deviation (from S_r): ± 10%
• EMC: Emission of interference and immunity to interference in accordance with the Vehicle Directive ECE-R10, Ed. 5: Type approval E1, Immunity according to DIN ISO 11452-2: 100 V/m, Vertical AM 20 MHz - 800 MHz - horizontal AM 200 MHz - 800 MHz - vertical/horizontal PM 800 MHz - 2.7 GHz, Conducted interference according to ISO 7637-2 (impulse/sensitivity limit/12 V failure criterion/24 V failure criterion): 1/IV/C/C, 2a/IV/A/A, 2b/IV/C/C, 3a /IV/A/A, 3b/IV/A/A, 4/IV/C/A, 5a/IV/B/B, 5b/IV/B/B, EN 61000-4-2 ESD: 4 kV CD / 8 kV AD, EN 61000-4-3 HF radiated: 10 V/m, EN 61000-4-4 Burst: 2 kV, EN 61000-4-5 Surge: 0.5 kV L-to-L, Ri: 2 Ohm, EN 61000-4-3 HF wired: 10 V/m,
• External influence test: Temperature change EN 60068-2-14, Na: TA = –25 °C, TB = 75 °C, t1 = 40 min, t2 = < 10 s, 300 cycles, delta S_r ? 10%
• Corrosion test: Salt spray, cyclic test EN 60068-2 -52: sensitivity limit 5, 4 cycles
• Direct current I_a: ? 200 mA
• Cable material: Polyurethane
• Transverse cable cross-section: 0.5 mmІ
• Wire diameter: Ш 5 mm
• Short circuit protection: ?
• Polarity inversion protection: ?
• Switch-on impulse suppression: ?
• Shock and vibration resistance: Vibration resistance EN 60068-2-6 Fc: 25 g peak (10 ... 2000 Hz) / –20 °C ... +50 ° C, Impact resistance EN 60068-2-27 Ea: 100 g 11 ms - 3 impacts in each direction 3 coordinate axes / –40 °C ... +85 °C, Long-term impact resistance EN 60068-2-29 Eb: 40 g rise 3 ms, 7 ms drop / 5000 shocks in each direction in 3 axes / –20 °C ... +50 °C, Wideband noise EN 60068-2-64: 15 g rms (5 Hz ... 2000 Hz ) / 8 hours in each direction along 3 coordinate axes / –40 °C ... +85 °C
• Operating temperature range: –40 °C ... +100 °C
• Case material: Stainless steel V4A, DIN 1.4404 / AISI 316L
• Material, active surface: Plastic, LCP
• Case length: 56 mm
• Useful thread length: 51 mm
• Max. tightening torque: Typ. 20 Nm
• Supply set: Fastening nut, brass, nickel-plated (2 pcs.)
• Protection class: III
• UL file no.: E181493
• MTTF_D: 1.196 years
• DC_avg: 0%
• Note: Values are indicative and subject to change
• Stainless steel (V2A): Approx. 0.65
• Aluminum (Al): Approx. 0.35
• Copper (Cu): Approx. 0.24
• Brass (Ms): Approx. 0.38
• Note: For relevant graphic materials, see section. “Installation instructions”
• B: 12 mm
• C: 12 mm
• D: 12 mm
• F: 32 mm
• Series:IMS
• Sensing distance:4 mm
• Output type:PNP
• Installation:flush
• Case type:cylindrical with thread
• Output function:NC