Sick IMS12-08NPONC0S

Inductive proximity sensor

Sick IMS12-08NPONC0S

Datasheet:

• Article: 1103203
• Case type: Cylindrical with thread
• Case design: Standard
• Thread size: M12 x 1
• Diameter: Ш 12 mm
• Sensing distance S_n: 8 mm
• Sensing distance ensured S_a: 6 ,48 mm
• Mounting: With protruding part
• Switching frequency: 2,000 Hz
• Connection type: M12 connector, 4-pin.
• Switching output: PNP
• Output function: Normally closed
• Electrical version: DC. current, 3-wire
• Protection type: IP68, IP69K,
• Special properties: Detergent resistant, Temperature resistance
• Special applications: Mobile work machines , Hygienic and high humidity areas, harsh operating conditions
• Supply voltage: 7.2 V DC ... 60 V DC
• Residual ripple: ? 10%
• Voltage drop: ? 2.5 V
• Current consumption: 10 mA
• Ready delay: 100 ms
• Hysteresis: 3 % ... 20 %
• Reproducibility: ? 2%
• Temperature deviation (from S_r): ± 10%
• EMC: Emission of interference and immunity to interference in accordance with the Vehicle Directive ECE-R10, Ed. 5: Type approval E1, Immunity according to DIN ISO 11452-2: 100 V/m, Vertical AM 20 MHz - 800 MHz - horizontal AM 200 MHz - 800 MHz - vertical/horizontal PM 800 MHz - 2.7 GHz, Conducted interference according to ISO 7637-2 (impulse/sensitivity limit/12 V failure criterion/24 V failure criterion): 1/IV/C/C, 2a/IV/A/A, 2b/IV/C/C, 3a /IV/A/A, 3b/IV/A/A, 4/IV/C/A, 5a/IV/B/B, 5b/IV/B/B, EN 61000-4-2 ESD: 4 kV CD / 8 kV AD, EN 61000-4-3 HF radiated: 10 V/m, EN 61000-4-4 Burst: 2 kV, EN 61000-4-5 Surge: 0.5 kV L-to-L, Ri: 2 Ohm, EN 61000-4-3 HF wired: 10 V/m,
• External influence test: Temperature change EN 60068-2-14, Na: TA = –25 °C, TB = 75 °C, t1 = 40 min, t2 = < 10 s, 300 cycles, delta S_r ? 10%
• Corrosion test: Salt spray, cyclic test EN 60068-2 -52: sensitivity limit 5, 4 cycles
• Constant current I_a: ? 200 mA
• Short circuit protection: ?
• Polarity inversion protection: ?
• Suppression of switching pulse: ?
• Shock and vibration resistance: Vibration resistance EN 60068-2-6 Fc: 25 g peak (10 ... 2000 Hz) / –20 °C ... +50 °C, Impact resistance EN 60068-2-27 Ea: 100 g 11 ms - 3 impacts in each direction 3 coordinate axes / –40 °C ... +85 °C, Long-term impact resistance EN 60068-2-29 Eb: 40 g rise 3 ms, fall 7 ms / 5000 shocks in each direction on 3 coordinate axes / –20 °C ... +50 °C, Broadband noise EN 60068-2-64: 15 g rms (5 Hz ... 2000 Hz) / 8 hours in each direction in 3 coordinate axes / –40 °C ... +85 °C
• Operating temperature range: –40 °C ... +100 °C
• Housing material: Stainless steel V4A, DIN 1.4404 / AISI 316L
• Material, active surface: Plastic, LCP
• Housing length : 65 mm
• Usable thread length: 43 mm
• Max. tightening torque: Typ. 20 Nm
• Supply set: Fastening nut, brass, nickel-plated (2 pcs.)
• Protection class: III
• UL file no.: E181493
• MTTF_D: 1.196 years
• DC_avg: 0%
• Note: Values are indicative and subject to change
• Stainless steel (V2A): Approx. 0.67
• Aluminum (Al): Approx. 0.42
• Copper (Cu): Approx. 0.35
• Brass (Ms): Approx. 0.42
• Note: For relevant graphic materials, see section. “Installation Instructions”
• A: 12 mm
• B: 24 mm
• C: 12 mm
• D: 24 mm
• E: 16 mm
• F: 64 mm
• Series:IMS
• Sensing distance: 8 mm
• Output type: PNP
• Installation: with protruding part
• Housing type: cylindrical with thread
• Output signal function: NC