Sick IQ80-60NUP-KK0

Inductive proximity sensor

Sick IQ80-60NUP-KK0

Datasheet:

• Article: 7902138
• Case type: Rectangular
• Case design: Standard
• Dimensions (W x H x D): 80 mm x 105 mm x 40 mm
• Sensing distance S_n: 60 mm
• Sensing distance ensured S_a: 48.6 mm
• Mounting: With projecting part
• Switching frequency: 4 Hz
• Connection type: Cable entry with M20 thread
• Switching output: PNP / NPN
• Output function: Normally closed or normally open
• Selectable switching properties: Hard-coded
• Electrical version: AC/DC current, 2-wire
• Protection type: IP65
• Supply voltage: 20 V AC/DC ... 250 V AC/DC
• Voltage drop: ? 6.5 V (AC)
• Hysteresis: 1% ... 15%
• Reproducibility: ? 10%
• Temperature deviation (from S< sub>r): ± 10%
• EMC: According to EN 55011, class B, According to EN 60947-5-2,
• DC current I_a : ? 350 mA, ? 250 mA, ? 100 mA,
• Residual current: ? 2.5 mA (AC 250 V)
• Minimum load current: > 5 mA
• Short-term current: 2.2 A
• Threaded connection of cables in the terminal box: M20 1.5
• Cross-section of cores: ? 2.5 mmІ
• Short circuit protection: –
• Shock and vibration resistance: 30 g, 11 ms/10...55 Hz, 1 mm
• Operating temperature range: –25 °C ... +80 °C
• Housing material: Plastic, PPE
• Material, active surface: Plastic, PPE
• Protection class: II
• Rated insulation voltage U_i: 250 V AC
• Consumption category: AC-140, DC-13,
• Degree of pollution: 3
• Maximum permissible impulse voltage: 4 kV
• Note: Values are indicative and subject to change
• Stainless steel (V2A): Approx. 0.7
• Aluminum (Al): Approx. 0.3
• Copper (Cu): Approx. 0.2
• Brass (Ms): Approx. 0.4
• Note: For relevant graphic materials, see section. “Installation instructions”
• A: 160 mm
• B: 160 mm
• C: 80 mm
• D: 150 mm
• E: 40 mm
• F: 480 mm
• Series:IQL
• Sensing distance:60 mm
• Output type:PNP / NPN
• Installation: with projecting part
• Housing type: rectangular
• Output signal function: NO / NC