Sick KT5W-2P1213
Registration sensors
- Tough, metal housing
- Various teach-in methods via control panel or control cable
- Maximum detection reliability due to 3-color RGB LED technology
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
| Part Number | 1016715 |
| Teach-in mode: | Dynamic teach-in |
| Dimensions (W x H x D): | 30.4 mm x 53 mm x 80 mm |
| Sensing distance tolerance: | ± 3 mm |
| Retention time (ET): | 25 ms, non-volatile memory |
| Enclosure rating: | IP 67 |
| Weight: | 400 g |
| Response time : | 50 µs |
| Light spot direction : | Vertical |
| Shock load: | According to IEC 60068 |
| Housing material: | Metal, Zinc diecast |
| Fieldbus interface: | - |
| Switching output: | PNP: HIGH = VS- ≤ 2 V / LOW approx. 0 V |
| Ambient storage temperature: | -25 °C ... +75 °C |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Input, light/dark (L/D): | Dark: U > 10 V ... < UV, Light: U = 0 V, PNP: |
| Output current Imax.: | 100 mA |
| Type of light: | Visible blue light, Visible green light, Visible red light |
| Ripple : | ≤ 5 Vpp |
| Sensing distance : | 20 mm |
| Connection type: | Male connector M12, 5-pin |
| Light spot size: | 1.5 mm x 5.5 mm |
| Wave length: | 470 nm, 525 nm, 640 nm |
| Input, teach-in (ET): | PNP:, Run: U < 2 V, Teach: U = 10 V ... < UV |
| Protection class : | II |
| Power consumption : | < 80 mA |
| Supply voltage: | 10 V DC ... 30 V DC |
| Light source : | LED |
| Light emission: | Long and short side of housing, exchangeable |
| Housing design (light emission): | Rectangular |
| Switching mode: | PNP |
| Switching frequency : | 10 kHz |
| Ambient operating temperature: | -10 °C ... +55 °C |
People also buy
Comments
No comments yet