Sick KTL5W-2P23
Registration sensors
- Various heat-resistant fiber-optic cable models are available
- Various teach-in methods, including potentiometer
- Analog output
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
Part Number | 1019551 |
Housing design (light emission): | Rectangular |
Response time : | 50 µs |
Teach-in mode: | Dynamic teach-in |
Input, teach-in (ET): | PNP:, Run: U < 2 V, Teach: U = 10 V ... < UV |
Switching frequency : | 10 kHz |
Switching output: | PNP: HIGH = VS- ≤ 2 V / LOW approx. 0 V |
Shock load: | According to IEC 60068 |
Light source : | LED |
Input, light/dark (L/D): | Dark: U > 10 V ... < UV, Light: U = 0 V, PNP: |
Sensing distance: | Dependent on the fiber-optic cablethe fiber-optic cable |
Ripple : | ≤ 5 Vpp |
Type of light: | Visible blue light, Visible green light, Visible red light |
Supply voltage: | 10 V DC ... 30 V DC |
Protection class : | II |
Ambient storage temperature: | -25 °C ... +75 °C |
Output function: | Light/dark switching |
Output current Imax.: | 100 mA |
Enclosure rating: | IP 67 |
Fieldbus interface: | - |
Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
Power consumption : | < 80 mA |
Retention time (ET): | 25 ms, non-volatile memory |
Light spot size: | Dependent on the fiber-optic cable |
Weight: | 400 g |
Wave length: | 470 nm, 525 nm, 640 nm |
Switching mode: | PNP |
Housing material: | Metal, Zinc diecast |
Time delay: | 20 ms |
Dimensions (W x H x D): | 30.4 mm x 53 mm x 80 mm |
Ambient operating temperature: | -10 °C ... +55 °C |
Connection type: | Male connector M12, 5-pin |
People also buy
Comments
No comments yet