Sick LFP1000-G1CMB

Fill level sensor

Sick LFP1000-G1CMB

Datasheet:

• Article: 1071122
• Media: Liquids
• Measurement method: Limit value, continuous
• Design: Remote electronics, cable length 2 m
• Probe length: 1,000 mm
• Operating pressure: –1 bar ... 16 bar
• Operating temperature: –20 °C ... +180 °C
• UL Certified: ?
• RoHS Certified: ?
• IO-Link: ?
• EHEDG Certified: ?
• li>Measuring element accuracy: ± 5 mm
• Reproducibility: ? 2 mm
• Resolution: < 2 mm
• Evaluation: < 400 ms
• Dielectric constant: ? 5 in rod probe, ? 1.8 with coaxial pipe,
• Electrical conductivity: Unlimited
• Inactive area on technical connection: 25 mm
• li>Inactive area at the end of the probe: ? 10 mm
• Mean time to failure: 194.3 years (EN ISO 13849-1)
• Supply voltage: 12 V DC ... 30 V DC
• Current consumption: ? 75 mA at 24 VDC without output load
• Initialization time: ? 2 s
• Protection class: III
• Connection type: Circular plug connector M12 x 1, 5-pin
• Cable length: 2 m
• Output signal: 1 x PNP + 1 x PNP/NPN + 4 mA ... 20 mA / 0 V ... 10 V
• Output load: 4–20 mA < 500 Ohm at Uv > 13.5 V, 4–20 mA < 400 Ohm at Uv > 12 V , 0–10 V > 750 Ohm at Uv 14 ? V
• Hysteresis: Min. 2 mm, freely adjustable
• Signal voltage HIGH: U_v - 2 V
• Signal voltage LOW: ? 2 V
• Output current: < 100 mA
• Inductive load: < 1 H
• Capacitive load: < 100 nF
• Protection type: IP67: EN 60529, IP69K: ISO 20653
• Temperature drift: < 0.1 mm/K
• Lower signal level: 3.8 mA ... 4 mA, 0 V
• Upper signal level : 20 mA ... 20.5 mA, 10.5 V
• EMC: EN 61326-2-3, 2014/30/EU
• Wetted materials: 1.4404 (Ra ? 0.8 µm), PEEK
• Technical connections: G ѕ A
• Housing material: 1.4305
• Housing design: With sight glass made of PMMA ( acrylic glass)
• Max. probe load: ? 6 Nm
• Coaxial line material: FEP
• Coaxial line length: 2 m
• Operating temperature range: –20 °C .. +60 °C
• Storage temperature range: –40 °C ... +80 °C
• Coax temperature range: –20 °C ... +60 °C
• Outdoor use: Only with weatherproof cover
• Category: Fill level sensors
• Series:LFP Inox
• Media: liquids
• Measurement method: limit value, continuous