Sick LFV200-XATGBTPM
Level sensors
We ship to United States of America!
- Housing made of 316L stainless steel
- Two electrical output versions available
- Commissioning without filling
Item Number:
LFV200-XATGBTPM
Delivery standard: 3-6 weeks, depending on the country.
Condition: new
The price and delivery terms is not final. Please check with the manager.
Contact our experts
- Overview +
- Comments +
Specification:
| Part Number | 6036363 |
| Response time: | 500 ms |
| Medium: | Fluids |
| Ambient storage temperature: | -40 °C ... +80 °C |
| Housing material: | Stainless steel 1.4404, PEI |
| Probe length: | 38 mm |
| Fill material density: | ≥ 0.7 g/cm |
| Output current: | < 250 mA |
| Ambient operating temperature: | -40 °C ... +70 °C |
| WHG approval: | + |
| Accuracy of sensor element: | ± 2 mm |
| Signal voltage LOW: | 0 V +- 1 V |
| Initialization time: | < 2 s |
| Process pressure: | -1 bar ... 64 bar |
| Power consumption: | < 10 mA |
| Capacitive load: | 100 nF |
| Measurement: | Switch |
| VDE protection class 2: | + |
| Supply voltage: | 10 V DC ... 55 V DC |
| Repeatability: | ≤ 1 mm |
| Signal voltage HIGH: | Vs - < 3 V |
| Silicon free: | - |
| Hysteresis: | 2 mm |
| Ripple: | ≤ 5 Vpp |
| Process connection: | G ? A PN 64 |
| Temperature drift: | 0,03 mm/K |
| Inductive load: | ≤ 1 H |
| Resolution: | ≤ 1 mm |
| Enclosure rating: | IP 67 |
| Authorizations: | WHG approval |
| Connection type: | Round connector M12 x 1, 4-pin |
| Viscosity: | 0.1 mPas ... 10,000 mPas |
| Process temperature: | -40 °C ... +150 °C |
| Wetted parts: | 316L (optional Ra < 0.8 µm) |
Buy Sick LFV200-XATGBTPM with the best possible price and delivery terms on eltra-trade.com
You will find a lot of industrial electrical products on eltra-trade.com. We can find any part you need. All your products can be consolidated and sent in one delivery. We supply only premium quality products. We can give you free delivery on large orders. Our company has proven itself as one of the best and most valuable suppliers in the world.
Comments
No comments yet