Sick M40E-68A303RB0

Multiple Beam System

Sick M40E-68A303RB0

Datasheet:

• Item number: 1203243
• Part of the system: Receiver
• Resolution: 30 mm
• Protective field height: 1,500 mm
• Scanning range: 21 m
• Synchronization: Optical synchronization
• Type: Type 4 (IEC 61496-1)
• Reliability class: SIL3 (IEC 61508), SILCL3 (EN 62061),
• Category: Category 4 (EN ISO 13849)
• Performance level: PL e (EN ISO 13849)
• PFHd (medium probability dangerous failure per hour): 28 * 10^-9 (EN ISO 13849)
• T_M (specified operating time): 20 years (EN ISO 13849)
• Safe state in case of error: At least one OSSD output is in the AUS state (OFF).
• Restart inhibit: ?: Internal
• li>External Device Monitoring (EDM): ?: Activated
• Beam coding: ?: Uncoded
• Configurable status output (diagnostic output): ?: Contamination (OWS)
• Transmitter testing: ?: Deactivated
• Adjustable scanning range: ?: Short scanning range
• Secure communication between SICK devices via EFI/SDL?
• Differentiation between people and materials (noise reduction)?
• Simultaneity control: ?
• Selective shutdown time control: ?
• Sensor gap control: ?
• Tape stop: ?
• Selective overrun shutdown: ?
• Control output: ?
• End selective shutdown via electrosensitive protective device: ?
• Extension connection: M12 socket, 5-pin
• Configuration type: Via software
• Configuration connection: M8 socket, 4-pin
• Display elements: 7-segment display
• Status indicator: LEDs
• Protection class : III (IEC 61140)
• Supply voltage U_V: 24 V DC (19.2 V ... 28.8 V)
• Residual ripple : ? 10%
• Current consumption: ? 0.8 A
• Case cross-section: 52 mm x 55.5 mm
• Case material: Aluminum alloy ALMGSI 0.5
• Surface treatment: Powder coated
• Front glass material: Polycarbonate, scratch resistant
• Protection type: IP65 (EN 60529)
• Operating temperature range: –30 °C ... +55 °C
• Storage temperature: –30 °C ... +70 °C
• Air humidity: 15% ... 95%, non-condensing
• Vibration resistance: 5 g, 10 Hz ... 55 Hz (IEC 60068-2-6)
• Shock resistance: 10 g, 16 ms (EN 60068-2-29)
• Wavelength: 950 nm
• Without beam coding: 14 ms
• With beam coding: 24 ms
• Connection type: Hirschmann connector M26, 12-pin
• Permissible cable length: ? 50 m
• Permissible wire cross-section: ? 0.75 mmІ
• Integration via EFI gateway: CANopen
• : Ethernet
• : PROFIBUS DP
• : PROFIBUS PROFIsafe
• : PROFINET PROFIsafe
• Integration via Flexi Soft safety controller: CANopen
• : DeviceNet
• : EtherCAT^®
• : EtherNet/IP
• : Modbus TCP
• : PROFIBUS DP
• : PROFINET
• Output type: 2 semiconductors with PNP junction, short-circuit proof , cross-circuit monitoring
• State “ON”, switching voltage HIGH: 24 V DC. (U_V – 2.25 V DC...U_V)
• Off state, switching voltage LOW: ? 2 V DC
• Current capacity of the output switching device: ? 500 mA
• Output type: PNP output, short circuit protected
• ON state switching voltage HIGH: 24 V DC (U_V – 4.2 VDC...U_V)
• Off state, switching voltage LOW: High impedance
• Admissible current load on the output signal switching device: ? 100 mA
• Scanning range: 21 m
• Category:Safety light curtains
• Series:M4000 Advanced Curtain