Sick MICS3-ABAZ90PZ1P01

Distance Sensor

Sick MICS3-ABAZ90PZ1P01

Datasheet:

• Article: 1100408
• Version: Sensor incl. system connector
• Application area: Indoor
• Protective field range: 9 m
• Signal field range: 64 m
• Number of simultaneously monitored fields: ? 4
• Number of fields: 8
• Number of control cases: 8
• Scanning angle: 275°
• Resolution (configurable): 30 mm, 40 mm, 50 mm, 60 mm, 70 mm, 150 mm, 200 mm,
• Angle resolution: 0.1°
• Rating: ? 115 ms
• Addition of protective field: 100 mm
• Type: Type 3 (IEC 61496)
• Reliability class: SIL2 (IEC 61508), SILCL2 (EN 62061),
• Category: Category 3 (EN ISO 13849)
• Performance level: PL d (EN ISO 13849 )
• PFHd (average probability of dangerous failure per hour): 8.0 x 10^-8 (EN ISO 13849)
• T_{M< /sub> (set operating time): 20 years (EN ISO 13849)}
• Safe state in case of error: Safety-enabled outputs via the network are logically 0.
• Restart inhibit : ?
• Multiple assessment: ?
• Switching the type of control: ?
• Synchronous control: ?
• Static switching of the protective field: ?
• Reliable contour recognition: ?
• Circuit as base: ?
• Built-in configuration memory: ?
• Output of measurement results: Via Ethernet
• Configuration type: PC with Safety Designer (configuration and diagnostic software)
• Configuration and diagnostic interface: USB 2.0, Mini-USB, Ethernet
• Field bus, fieldbus: PROFINET
• Display elements: Graphic color display, LEDs
• Protection class: III (EN 61140)
• Supply voltage U_{V: 24 V DC (16.8 V DC ... 30 V DC)}
• Power consumption: 7 W (without output load)
• Dimensions (W x H x D ): 112 mm x 150.8 mm x 111.1 mm (without system connector)
• Weight: 1.45 kg
• Case material: Aluminum
• Housing colour: RAL 1021 (bright yellow), RAL 9005 (black)
• Protective shield material: Polycarbonat
• Protective shield surface: Scratch-resistant coating on the outside.
• Protection type: IP65 (IEC 60529)
• Insensitivity to external light sources: ? 3.000 lx (IEC 61496-3)
• Operating temperature range: –10 °C .. +50 °C
• Storage temperature: –25 °C ... +70 °C
• Vibration resistance: 0.35 mm, 10 Hz ... 60 Hz (IEC 60068 -2-6, IEC 61496-1, IEC 61496-3), 5 g, 60 Hz ... 150 Hz (IEC 60068-2-6, IEC 61496-1, IEC 61496-3)
• EMC: IEC 61496-1, IEC 61000-6-2, IEC 61000-6-4,
• Emission type: Pulsed laser diode
• Wavelength: 845 nm
• Detectable diffuse reflectance: 1.8% ... more than 1000%
• Laser class: 1M (21 CFR 1040.10 and 1040.11, IEC 60825-1)
• Supply voltage : 1 M12 plug, 4-pin, A-coded
• Field bus, industrial bus: 2 M12 sockets, 4-pin, D-coded
• OSSD pairs: 0
• Safety-enabled outputs via network: 4
• Protocol: PROFIsafe
• Supported protocol versions: PROFINET Specification V2.3
• : PROFIsafe profile according to specification V2.6.1
• GSDML: According to GSDML V2.33 specification
• Cycle time: 1 ms, 2 ms, 4 ms, 8 ms, 16 ms …
• Compliance: Conformance Class C
• Network Management: SNMP
• : MIB-2
• : LLDP per IEEE 802.1AB
• : MRP Support -client
• Payload: Class III payload per Security Level 1 Test
• Switch parameters: Real-time 2-port switch per IEEE 802
• li>Port Settings: 100Base-TX
• : Auto Negotiation
• : Auto Transition (MDIX)
• : Auto Polarity
• Diagnostics: I&M entries 0 … 5
• : PROFINET alarms
• Further services: PROFIenergy
• : F_iPar_CRC
• : Acyclic read/write services for communication via TCI interface
• Further interfaces: TCP/IP communication via port 9000
• Long shocks: 10 g, 16 ms (IEC 60068-2-27, IEC 61496-3)
• Protection field range: 9 m
• Scanning angle: 275°
• Category:Laser security scanners
• Series:microScan3