Sick MICS3-CCAZ55LZ1

Distance Sensor

Sick MICS3-CCAZ55LZ1

Datasheet:

• Article: 1100399
• Version: Sensors without system connector
• Application area: Indoor
• Protective field range: 5.5 m
• Signal field range: 40 m
• Number of simultaneously monitored fields: ? 8
• Number of fields: 128
• Number of control cases: 128
• Scanning angle: 275°
• Resolution (configurable): 30 mm, 40 mm, 50 mm, 70 mm, 150 mm, 200 mm,
• Angle resolution: 0.39°
• Rating: ? 95 ms
• Addition of protective field: 65 mm
• Type: Type 3 (IEC 61496)
• Reliability class: SIL2 (IEC 61508), SILCL2 (EN 62061),
• Category: Category 3 (EN ISO 13849)
• Performance level: PL d (EN ISO 13849)
• PFHd (average probability of dangerous failure per hour): 8.0 x 10^-8 (EN ISO 13849)
• T_M (specified operating time): 20 years (EN ISO 13849)
• Safe state in case of error: Safety-supported outputs via the network are logically 0.
• Restart inhibit: ?
• Multiple evaluation: ?
• Switching the type of control: ?
• Synchronous control: ?
• Static switching of the protective field: ?
• Reliable edge recognition: ?
• Loop as base: ?
• Built-in configuration memory: ?
• Output of measurement results: Via Ethernet
• Configuration type: PC with Safety Designer (configuration and diagnostic software)
• Configuration and diagnostic interface: USB 2.0, Mini-USB, Ethernet
• Field bus, industrial bus : PROFINET
• Indication elements: Graphic color display, LEDs
• Protection class: III (EN 61140)
• Supply voltage U_V : 24 V DC (16.8 V DC ... 30 V DC)
• Power consumption: 8.4 W (without output load)
• Dimensions (W x H x D ): 112 mm x 163.1 mm x 111.1 mm
• Case material: Aluminum
• Case color: RAL 1021 (bright yellow), RAL 9005 (black)
• Protective screen material: Polycarbonat
• Surface of the protective screen: External surface coating is scratch-resistant.
• Protection type: IP65 (IEC 60529)
• Insensitive to external light sources: ? 3.000 lx (IEC 61496-3)
• Operating temperature range: –10 °C ... +50 °C
• Storage temperature: –25 ° C ... +70 °C
• Vibration resistance: 0.35 mm, 10 Hz ... 60 Hz (IEC 60068-2-6, IEC 61496-1, IEC 61496-3), 5 g , 60 Hz ... 150 Hz (IEC 60068-2-6, IEC 61496-1, IEC 61496-3)
• EMC: IEC 61496-1, IEC 61000-6-2, IEC 61000- 6-4,
• Type of radiation: Pulsating laser diode
• Wavelength: 845 nm
• Detectable diffuse reflection: 1.8% ... more than 1000%
• Laser class: 1M (21 CFR 1040.10 and 1040.11, IEC 60825-1)
• Supply voltage: 1 M12 plug, 5-pin, L-coded
• >Field bus, industrial bus: 2 SCRJ sockets for push-pull plug (fiber optic cable)
• OSSD pairs: 0
• Safety outputs via network: 8
• Protocol: PROFIsafe
• Supported protocol versions: PROFINET V2.3 specification
• : PROFIsafe profile according to V2.6.1 specification
• GSDML: According to GSDML V2.33 specification
• Cycle time: 1 ms, 2 ms, 4 ms, 8 ms, 16 ms …
• Compliance: Conformance Class C
• Network management: SNMP
• : MIB-2
• : LLDP according to IEEE 802.1AB
• : MRP client support
• Payload: Class III payload according to security level Security Level 1 Test
• Switch Parameters: IEEE 802 Real-Time 2-Port Switch
• Port Parameters: 100BASE-POF
• Diagnostics: I&M Records 0 … 5
• : PROFINET alarms
• : Damping diagnostics via POF
• Further services: PROFIenergy
• : F_iPar_CRC
• : Acyclic read/write services for communication via TCI interface
• Further interfaces: TCP/IP communication via port 9000
• Long shocks: 10 g, 16 ms (IEC 60068- 2-27, IEC 61496-3)
• Protective field range:5.5 m
• Scanning angle strong>:275°
• Category:Laser security scanners
• Series:microScan3