Sick MLG1-0440A812 Measuring automation light grids
Item Number: MLG1-0440A812
- Two analog outputs: voltage to current
- Resolutions of 10 / 20 / 30 / 50 mm and customer-specific resolutions
- Working range up to 8.5 m
- Overview
- Datasheet
- Alternative numbers
- Comments
Specification:
| Part Number | 1059291 |
| EMC: | EN 60947-5-2 |
| Task: | Measurement light grid |
| Synchronization: | Cable |
| Supply voltage Vs: | DC 18 V ... 30 V |
| Output load inductive: | 1 H |
| Configuration: | Parameterization interface (measuring) |
| Output current Imax.: | 100 mA |
| Ripple: | < 5 Vpp |
| Housing material: | Aluminum |
| Enclosure rating: | IP 65 |
| Dimensions (W x H x D): | 34 mm x 514 mm x 29 mm |
| Maximum range : | 7 m |
| Power consumption: | 230 mA |
| Indication: | 7-segment display, LED |
| Protection class: | III |
| Front screen: | PMMA |
| Inputs: | 1 x PNP |
| Minimum range: | Parallel beam: ≥0 mm |
| Switching output: | 2 x Analog 1 x PNP |
| Vibration resistance: | 5 g, 10 Hz ... 55 Hz (IEC 68-2-6) |
| Working range: | 5 m |
| Wave length: | IR 880 nm |
| Technology: | Sender/receiver |
| Beam separation: | 10 mm |
| Connection type: | Male connector M12, 8-pin |
| Detection height: | 440 mm |
| Number of beams: | 45 |
| Initialization time: | 1 s |
| Power consumption receiver : | 235 mA |
| Output load capacitive: | 100 nF |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Shock load: | 10 g / IEC 68-2-29 / 16 ms |
| Ambient temperature: | Operation: -25 ... +55 °C, Storage: -40 ... +70 °C |
| Response time : | Parallel beam: ≥7.75 ms |
| Weight: | 1.512 kg |
| Ambient light safety : | Direct: ≥12,500 lx, Indirect: ≥50,000 lx |
| Minimum detectable object (MDO): | Parallel beam: ≥15 mm |
| Power consumption sender : | 230 mA |
People also buy
Comments
No comments yet