Sick MLP1-SMUA0AC

Magnetic Locking Module

Sick MLP1-SMUA0AC

Datasheet:

• Article: 1117627
• Sensor operating principle: Transponder
• Locking principle: Normally open circuit principle
• Coding: Uniquely coded
• Holding force F_max: 550 N (GS-ET-19)
• Holding force F_Zh: 500 N (GS-ET- 19)
• Holding force: 25 N
• Shift tolerance: ? 5 mm
• Safe switch-off distance S_ar: 35 mm
• For process protection only: ?
• Safety class: SIL3 (IEC 61508), SILCL3 (EN 62061),
• Category: Category 4 (EN ISO 13849 )
• Performance level: PL e (EN ISO 13849)
• PFHd (average probability of dangerous failure per hour): 15 * 10^-9 (EN ISO 13849)
• T_M (specified service life): 20 years (EN ISO 13849)
• Design type: Construction type 4 (EN ISO 14119)
• Starter coding degree: High coding degree (EN ISO 14119)
• Safe state in case of error: At least one safety semiconductor output (OSSD) is in the AUS (OFF) state.
• Reliable daisy chain: No, only individual wiring (with diagnostics)
• Connection type: Cable with M12 connector, 5-pin.
• Status indication: ?
• Protection class: III (IEC 61140)
• Pollution degree: 3 (EN 60947-1)
• cULus classification: Class 2
• Consumption category: DC-13 (IEC 60947-5-1)
• Rated insulation voltage U_i: 32 V
• Maximum permissible pulse voltage U_imp: 1.500 V
• Switching frequency: ? 0.5 Hz
• Output type: Self-monitoring semiconductor outputs (OSSD)
• Output current (OSSD output switching device): ? 100 mA
• Diagnostic output: ? 25 mA, short-circuit protected
• Wire capacitance: 400 nF (at OUT A and OUT B)
• Rating: 50 ms
• Unlock time: 100 ms
• Risk time: 100 ms
• On delay: 2, 5 s
• Locking principle: Normally open circuit principle
• Protection type: IP67 (EN 60529)
• Operating temperature range: –20 °C ... + 55 °C
• Storage temperature: –25 °C ... +70 °C
• Relative humidity: 50%, at 70 °C (IEC 60947-5-2)
• Vibration resistance: 10 Hz ... 55 Hz, 1 mm (IEC 60068-2-6)
• Shock resistance: 30 g, 11 ms (EN 60068-2-27)
• EMC: EN IEC 61326-3-1, EN IEC 60947-5-2, EN IEC 60947-5-3,
• Cable length: 150 mm
• Cable material: PVC
• Connection cable length: ? 140 m
• Sensor: 24 V DC (19.2 V DC ... 28.8 V DC)
• Magnet: 24 V DC (19.2 V DC ... 28.8 V DC)
• Sensor: 24 V DC (22.8 V DC ... 28.8 V DC)
• Magnet: 24 V DC (21.6 V DC ... 28.8 V DC)
• Blocking device active: 350 mA
• Blocking device inactive : 50 mA
• Switch: 510 g
• Starter: 210 g
• Sensor housing: Anodized aluminum
• Starter housing: PVC with reinforcement fiberglass
• Anchor plate: Nickel-plated steel
• Switch: 120 mm x 60 mm x 38.5 mm
• Starter: 120 mm x 60 mm x 20.5 mm
• Vertical: ? 5 mm
• Horizontal: ? 5 mm
• Opening angle: ? 3°
• Series:MLP1
• Category:Safety locking devices
• Output type: semiconductor
• Type of connector: M12
• Type of connection: cable
• Cable length, m< /strong>:0.15