Sick MM18-00A-N-ZC0
Magnetic and Capacitive Sensors

Sick MM18-00A-N-ZC0
  • Detection of magnets in explosive areas
  • Operating distances up to 70 mm or more based on the magnet strength
  • NAMUR as per EN 60 947-5-6
Item Number: MM18-00A-N-ZC0
91.70
-
+
Total price: 91.70
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

Specification:

Part Number1026614
Reverse polarity protection:+
Current consumption, sensor is activated:≥ 2.5 mA
Internal inductance Li max.:35 µH
Wire-break protection:1
Tightening torque, max.:≤ 25 Nm
Cable resistance:≤ 50 &;937;
Output characteristic:Control courrent depending on switching state according to NAMUR EN 60947-5-6
Connection type:Connector M12, 4-pin
Magnetic sensitivity:0.4 mT
Hysteresis:1 % ... 10 %
Input power Pi max.:100 mW
Temperature drift (of Sr):± 10 %
Time delay before availability:≤ 2 ms
Magnetic alignment:Axial
Shock/vibration:30 g, 11 ms / 10 ... 55 Hz, 1 mm
Input voltage Ui max.:16 V
EC Approval Certificate:T?V 99 ATEX 1398
Nominal voltage:8.2 V DC
Sensing range Sn:120 mm
Switching output:NAMUR
Input current Ii max.:30 mA
Switching frequency:5,000 Hz
EMC:According to EN 60947-5-2
Current consumption, sensor is not activated:≤ 1 mA
Ripple:≤ 5 %
Hazardous area category:2G
ATEX marking:EX II 2G Ex ia IIC T6 Ta: -20 °C ... 70 °C
Items supplied:Fastening nuts (2 x)
Special feature:Advanced sensing range
Housing material:Metal, Nickel-plated brass
Short-circuit protection:+
Internal capacitance Ci max.:15 nF
Thread size:M18 x 1
Assured sensing range Sa:97.2 mm
Design:Cylindrical
Ambient operating temperature:-25 °C ... 75 °C
Enclosure rating:IP 67
Electrical wiring:NAMUR
Housing length:65 mm
Repeatability:≤ 1 %

Comments

No comments yet

Write a comment