Sick MPS-025CLTQDS01

Magnetic Position Sensor

Sick MPS-025CLTQDS01

Datasheet:

• Article: 1111002
• Cylindrical housing: C-slot
• Cylindrical housings with adapter: Round cylinder, Profile cylinder and cylinder with tie rods, SMC bus CDQ2, SMC bus ECDQ2,
• Measuring range: 25 mm
• Housing length: 41 mm
• Switching output: Push-pull mode: PNP/NPN
• Output function: Analog, IO-Link, switching output
• Electrical version: DC. current, 4-wire
• Analog output (voltage): 0 V ... 10 V
• Analogue output (current): 4 mA ... 20 mA
• Settings: ?
• Protection type: IP67
• Supply voltage: 12 V DC ... 30 V DC
• Current consumption: 42 mA
• Voltage drop: ? 2 V
• DC current I_a: ? 100 mA
• Max. load resistance: ? 500 ? Current output, at 24 V
• Min. load resistance: ? 2 k?
• Protection class: III
• Ready delay: 0.15 s
• Required magnetic field strength typ.: 3 mT ... 12 mT
• Typical resolution: ? 50 µm
• Typical non-linearity: 0.3 mm
• Typical repeatability: 0.1 mm
• Reading speed typ.: 1 ms
• Digital switching output: ?
• IO-Link: ?
• Switching status LED: ?
• Polarity inversion protection: ?
• Short circuit protection: ?
• Operating temperature range: –20 °C ... +70 °C
• Shock and vibration resistance: 30 g, 11 ms/10...55 Hz, 1 mm
• EMC: According to EN 60947-5-7
• Connection type: Cable with M12 connector , 4-pin, with knurled nut, 0.6 m
• UL File No.: NRKH.E181493 & NRKH7.E181493
• Communication Interface: IO-Link V1.1
• Communication interface, detailed description: COM3
• Cycle time: 1 ms
• Process data length: 16 Bit
• Process data structure: Bit 0 = digital signal Q_L1, Bit 1 = digital signal Q_L2, Bit 2 = digital signal Q_L3, Bit 3 = digital signal Q _L4, Bit 4 ... 15 = position (in 50 ?m),
• Control panel settings: Analog output learning, Current/potential output selection, Analog output inverting, Digital output learning switching outputs
• IO-Link: Teach 4 switching points, Pin 2 configuration (0 - 10 V, 4 – 20 mA), Measuring range (mm) teach (analogue output), Teach button lock, Teach modes per output via IO-Link (cylinder switching mode, two-point mode, window mode and single-point mode)
• Deep cooling characteristic: Do not deform the cable below 0 °C
• Wire cross-section: 0 .08 mmІ
• Cable diameter: Ш 2.6 mm
• Bending radius: Fixed installation > 5 x cable diameter
• : Mobile > 10 x cable diameter
• Cable outlet: Axial
• Housing: Plastic
• Cable: Polyurethane
• Category:Position sensors
• Series:MPS-C
• Output type:PNP / NPN
• Output signal function: analog
• Measuring range: 0 ... 25 mm