Sick NCV50B-11EC0100100

Laser surface motion sensor

Sick NCV50B-11EC0100100

Datasheet:

• Article: 1106857
• Features: Opening up new areas of application in motion control. SPEETEC® closes the gap between tactile wheel systems and sophisticated laser Doppler sensors and, thanks to non-contact measurement, is suitable for almost all surfaces and objects., Non-contact measurement on a moving surface without reference, Class 1 laser,
• MTTFd: time before dangerous failure: 33 years
• RADIATION SOURCE: 2 continuous lasers
• Shaft length: 850 nm
• Laser class: 1 (IEC 60825-1 :2014)
• Type of radiation: Invisible infrared light
• Type. measurement field size (distance): 2 mm x 3 mm (at 50 mm), 8 mm x 3 mm (at 45 mm), 8 mm x 3 mm (at 55 mm),
• Laser power ( each): 0.78 mW
• Distance to measured surface: 50 mm
• Static installation tolerance: Ca. ± 5 mm
• Motion direction: 1D, x direction
• Motion detection: Bidirectional
• Measuring step (resolution µm/pulse): 100
• Velocity measuring range: > 0 m/s ... 10 m/s
• Acceleration tolerance: ? 30 m/sІ
• Internal reading speed: 330 µs
• Standby time: 2.9 ms
• Supply voltage: 12 V ... 30 V
• Communication interface: HTL / Push pull
• Output frequency signal: ? 625 kHz
• Connection type: Connector, M12, 8-pin, A-coded
• Power consumption: < 8 W
• Load current: ? 30 mA, per channel
• Polarity inversion protection: ?
• Protection class: III according to DIN EN 61140
• Short-circuit protected outputs: ?
• Initialization time: Max. 3 s
• Dimensions: 140 mm x 95 mm x 32.5 mm (without plug)
• Weight: 400 g
• EMC: EN 61000-6- 2, EN 61000-6-3
• Protection type: IP65 (EN 60529), IP67 (EN 60529),
• Permissible relative humidity: 70%
• Measurement accuracy: 0.1%
• Reproduction accuracy: 0.05%
• Case: Aluminum
• Glass: PMMA
• Plug-in connector: PA66, copper-zinc alloy (CuZn)
• Permissible pitch angle: ? ± 1.5°
• Permissible yaw angle: ? ± 1.5°
• li>Allowable roll angle: ? ± 10°
• Operating temperature range: 0 °C ... +45 °C
• Storage temperature range: –32 °C ... +60 °C, unpacked
• Shock resistance: 30 g, 6 ms (EN 60068-2-27)
• Vibration resistance: 20 g, 10 Hz ... 2.000 Hz (EN 60068-2-6)
• Category:Laser surface motion sensors
• Series:SPEETEC 1D