Sick NTL6-B12
Contrast sensors
Contrast sensors
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
RGB, white LEDs and red lasers
Bar graph display visually indicates contrast performance (KT5, KT10)
High switching frequency
Part Number | 1008616 |
Weight: | Approx. 540 g (with cable) |
Power consumption : | < 80 mA |
Pull-up/Pull-down resistor: | 22 k OHM |
Light spot size: | Dependent on the fiber-optic cable |
Light emission: | Long and short side of housing, exchangeable |
Adjustment: | Manual adjustment, potentiometer |
Switching output: | B: HIGH = Uv - < 2 V / LOW = < 2 V |
Function: | Light/dark switching |
Dimensions (L x W x H): | 64 mm x 80 mm x 30.4 mm |
Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
Ripple : | ≤ 5 Vpp |
Ambient temperature: | Operation: 0 ... +50 °C, Storage: -25 ... +75 °C |
Enclosure rating: | IP 67 |
Output current Imax.: | 200 mA |
Supply voltage Vs: | DC 10 V ... 30 V |
Light source : | LED red, infrared |
Sensing distance: | Dependent on the fiber-optic cablethe fiber-optic cable |
Sensing distance tolerance: | Dependent on the fiber-optic cablethe fiber-optic cable |
Response time: | > 50 µs |
Switching frequency: | 10 kHz |
Switching mode: | PNP NPN |
Connection type: | 2 m cable with connector T 3104/1 |
Analog output QA: | 0.15 V ... 6 V |
People also buy
Comments
No comments yet