Sick PFG19-E1CM1029 Wire Draw (Rope) Encoders

Sick PFG19-E1CM1029
Item Number: PFG19-E1CM1029
  • Measuring lengths of 1.25 m, 3 m, 5 m, and 10 m
  • Very small dimension (55 ... 190 mm)
  • Modular system: encoder type, measuring length, and interface can be selected
Total price: 811.67
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments


Part Number1061022
Measuring range:0 m ... 10 m
Working temperature range (encoder):-30 °C ... +70 °C
Resolution (wire draw + encoder):0.034 mm
Spring return force:9 N ... 12 N
Encoder:Incremental encoders
Mounted mechanic:MRA-G190-110D3
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Wire acceleration:8 m/s²
Hysteresis:≤ 0.4 mm
Electrical interface:HTL/Push pull
Life of wire draw mechanism:1 million cycles
Mounted encoder:DFS60
Part number encoder:1037616
Mass (mechanics):1.9 kg
Mass (measuring wire):1.2 g/m
Measuring wire material:Highly flexible stranded steel 1.4401 stainless steel V4A
Enclosure rating encoder:IP 67
Housing material, wire draw mechanism:Plastic, Noryl
MTTFd: mean time to dangerous failure:300 a
Measuring wire diameter:0.55 mm
Part number mechanic:5326242
Operating speed:4 m/s
Initialization time:≤ 32 ms, with mechanical zero pulse width≤ 30 ms
Linearity:≤ ± 2 mm
Working temperature range (mechanics):-30 °C ... +70 °C
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Reference signal, number:1, electronically, gated with A and B
Connection type:Male connector M12, 8-pin, radial
Power consumption:0.7 W
Maximum load current:30 mA
Enclosure rating mechanic:IP 50
Resistance to shocks:60 g, 6 ms (according to EN 60068-2-27)
Actual length of cable extension:10.2 m
Reference signal, position:Electronically, gated with A and B
Supply voltage:4.5 V ... 32 V
Repeatability:≤ 0.2 mm
Relative humidity / Condensation:90 % (condensation of the optical scanning not permitted)
Working temperature range (combination):Wird definiert durch den höheren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik
Pulses per revolution:16,384
Maximum output frequency:600 kHz
Length of wire pulled out per revolution:555 mm
Mass (including encoder):2.2 kg


No comments yet

Write a comment