Sick RE15-SAC

Non-contact safety switches

Sick RE15-SAC

Datasheet:

• Article: 1105317
• Part of the system: Sensor and starter
• Sensor operating principle: Magnetic
• Number of normally open contacts: 1
• Number of normally closed contacts: 1
• Number of signal contacts: 0
• Safe switching distance S_ao: 7 mm
• Safe switch-off distance S_ar: 20 mm
• Active touch surfaces: 1
• Switching directions: 5
• Value B_10d: 2 x 10⁷ operating cycles
• Design type: Design type 4 (EN ISO 14119)
• Starter coding degree: Low coding degree (EN ISO 14119)
• Safe state in case of error: The switch does not have an internal error detection function and cannot go into a safe state in the event of a fault. Error detection is carried out using a connected safety-oriented logic block.
• Reliable daisy chain: No, individual wiring only (with diagnostics)
• Connection type: M8 connector, 4- contact
• Output type: Reed switches
• Switching voltage: ? 30 V DC
• Switching current: ? 100 mA
• Housing type: Rectangular
• Dimensions (W x H x D): 26 mm x 36 mm x 13 mm
• Weight: + 0.1 kg
• Case material: PPS , glass fiber reinforced
• Protection type: IP67 (IEC 60529)
• Operating temperature range: –20 °C ... +60 °C
• Storage temperature: –20 °C ... +60 °C
• Vibration resistance: 10 Hz ... 55 Hz, 1 mm (EN 60947-5-3)
• Shock resistance: 30 g, 11 ms (EN 60947-5-3)
• Series:RE1
• Category: Non-contact safety switches
• Output type: reed switches
• Connector type: M8
• Type connection: connector
• Case material: plastic