Sick RLY3-OSSD100

Protection relay

Sick RLY3-OSSD100

Datasheet:

• Article: 1085343
• Application: Extension of outputs for OSSD
• Compatible sensor types: Safety sensors with OSSD outputs
• Reliability class: SIL3 ( IEC 61508), SILCL3 (IEC 62061),
• Category: Category 4 (ISO 13849-1)
• Performance level: PL e (ISO 13849-1)
• li>PFHd (average probability of dangerous failure per hour): 1.0 x 10^-9
• T_M (specified operating time): 20 years (ISO 13849-1)
• Safe state in case of error: The safety relay has no internal error detection function and cannot go into a safe state in the event of a fault. Error detection is carried out using a connected safety-oriented logic block.
• Stop Category: 0 (IEC 60204-1)
• Path for External Device Monitoring (EDM): ?
• Connection type: Front plug with spring terminals
• Inputs: 2 inputs with safety support
• Outputs: 2 release circuits (safe), 1 current feedback circuit ( for use as a control system for external devices, not safe),
• Indication elements: LEDs
• Supply voltage: Passive (without active power supply)
• Power consumption (input circuits): ? 1.5 W (DC)
• Quantity: 2
• Input current: ? 50 mA
• Control pulse width: ? 1 ms
• Test pulse frequency: ? 10 Hz
• Rating: 12 ms
• Quantity: 2
• Output type: Normally open contacts, with forced control
• Contact material: Silver alloy, fine gold plating
• Switching voltage: 10 V AC ... 230 V AC, 10 V DC ... 230 V DC,
• Switching current: 10 mA ... 6 A
• Total current: 12 A
• Service life of mechanical components: 1 x 10⁷ cycles response
• Overvoltage category: III (EN 60664-1)
• Maximum permissible impulse voltage U_imp: 6 kV (EN 60664-1)
• Quantity: 1
• Output type: Normally closed contact, with forced control
• Contact material: Silver alloy, fine gold plating
• Switching voltage: 15 V AC ... 30 V AC, 15 V DC ... 30 V DC,
• Switching current: 3 mA ... 100 mA
• Service life of mechanical components: 1 x 10⁷ actuation cycles
• Dimensions (W x H x D): 18 mm x 124.6 mm x 85.5 mm
• Weight: 130 g
• Protection type: IP20 (IEC 60529)
• Operating temperature range: –25 °C ... +55 °C
• Storage temperature: –25 ° C ... +70 °C
• Humidity: 10% ... 95%, non-condensing
• Interference emissions: According to IEC 61000-6-4
• Immunity: According to IEC 61326-3-1, According to IEC 61000-6-2, According to IEC 60947-5-1,
• HIGH: 24 V DC (15 V ... 30 V)
• LOW: 0 V DC (–3 V ... 5 V)
• Category: Protective relays
• Series:ReLy