Sick RLY3-OSSD300

Protection relay

Sick RLY3-OSSD300

Datasheet:

• Article: 1099969
• Application: Data processing device
• Compatible sensor types: Safety sensors with OSSD outputs
• Reliability class: SIL3 (IEC 61508), SILCL3 (IEC 62061),
• Category: Category 4 (ISO 13849-1)
• Performance level: PL e (ISO 13849-1)
• PFHd (average probability of dangerous failure per hour): 1.0 x 10^-9
• T_M (specified operating time): 20 years ( ISO 13849-1)
• Safe state in the event of an error: The normally open contacts are open, i.e. the safety-oriented enabling circuits are interrupted.
• Stop category: 0 (IEC 60204-1)
• Sensor control: Sequential control
• Restart interlock: ?
• Reset: Automatic, Manual,
• External device control (EDM): ?
• Connection Type: Front Plug with Spring Clamps
• Inputs: 2 Safety Inputs, 1 Reset Button or External Device Monitor (EDM) Input,
• li>Outputs: 3 unlocking circuits (safe), 2 diagnostic outputs (not safe), 1 test pulse output (not safe),
• Indication elements: LEDs
• Configuration type: Via connecting wiring
• Supply voltage: PELV or SELV
• Supply voltage U_V: 24 V DC (16.8 V ... 30 V)
• Residual ripple: ? 2.4 V
• Power consumption: ? 2.5 W (DC)
• Quantity: 2
• Input current : 4 mA ... 6 mA
• Control pulse width: ? 1 ms
• Control pulse frequency: ? 10 Hz
• Quantity: 1
• Input current: 4 mA ... 6 mA
• Rating: 12 ms
• Quantity: 3
• Output type: Normally open contacts, with forced control
• Contact material: Silver alloy, fine gold plating
• Switching voltage: 10 V AC ... 230 V AC, 10 V DC ... 230 V DC,
• Switching current: 10 mA ... 6 A
• Total current: 12 A
• Service life of mechanical components: 1 x 10⁷ operating cycles
• Overvoltage category: III (EN 60664-1)
• Maximum permissible impulse voltage U_imp: 6 kV (EN 60664-1)
• Quantity: 2
• Output type: Push-Pull semiconductor output, short-circuit protected
• Input current (NPN): ? 15 mA
• Output current (PNP): ? 120 mA
• Quantity: 1
• Output type: PNP semiconductor, short-circuit protected
• Output voltage: ? U_V – 3 V
• Test pulse width: 2 ms
• Test pulse interval: 40 ms
• Dimensions (W x H x D) : 18 mm x 124.6 mm x 85.5 mm
• Weight: 150 g
• Protection type: IP20 (IEC 60529)
• Operating temperature range: –25 °C ... +55 °C
• Storage temperature: –25 °C ... +70 °C
• Air humidity: 10% ... 95%, non-condensing
• Interference emission: According to IEC 61000-6-4
• Immunity to interference: According to IEC 61326-3-1, According to IEC 61000-6-2, According to IEC 60947-5 -1,
• HIGH: 24 V DC (11 V ... 30 V)
• LOW: 0 V DC (–3 V ... 5 V)
• HIGH: 24 V DC (11 V ... 30 V)
• LOW: 0 V DC (–3 V ... 5 V)
• HIGH: ? U _V – 3 V
• LOW: ? 3 V
• Category: Protective relays
• Series:ReLy