Sick SLG25S-020SAR11D30

Switching automated light curtains

Sick SLG25S-020SAR11D30

Datasheet:

• Item number: 1121763
• Operating principle: Transmitter/receiver
• Distance between beams: 25 mm
• Control height: 200 mm
• Optical light output: Slim
• Light source: LED
• Number of beams: 8
• Type of synchronization: Optical (2 beams)
• IO-Link: ? , V1.1
• Supply voltage U_B: DC. current 18 V DC ... 30 V DC
• Protection class: III
• UL file no.: NRKH.E181493 & NRKH7.E181493
• Residual ripple: ? 1.3 V_ss
• Protection circuits: U_v-connections with reverse polarity protection, Output Q with short-circuit protection, Outputs with protection against short circuit,
• Weight: 760 g
• Housing material: Aluminum, Plastic,
• Front glass material: PMMA
• Surge protection (required): 1
• Protection type: IP65, IP67,
• Shock resistance: 10 g, 16 ms, DIN EN 60068-2-27
• Vibration resistance: 10-150 Hz 0.5 mm, IEC 60068-2-6
• EMC: EN 61000-6-2, EN 61000-6-4
• Humidity: 90% ... 96%
• Insensitivity to external light sources: Direct: 30,000 lx
• Operating temperature range: –25 °C ... +55 °C
• Temperature range during storage: –25 °C ... +70 °C
• Intellectual task designation: Basic logic
• Logic function: Direct, AND, OR,
• Timer function: Deactivated, On delay, Off delay, On/off delay, Pulse (One Shot),
• Limits: 150 mm ... 4,900 mm
• Parallel beam (recommended ): 440 mm ... 3,500 mm
• 7 cross beams (recommended): 470 mm ... 3,500 mm
• Distance from 1st beam to front edge of housing: 4, 6 mm
• Distance from last beam to leading edge (top side) of housing: 19.6 mm
• Pin 2 (MF): Training input
• Pin 4 (OUT): Object detection, output = HIGH
• IO-Link (process data): Q_L/Q_int Status, System status, Beam status
• Learning (preset): Automatic learning
• IO-Link: For setting the sensor parameters and smart job functions
• Emission type: Infrared light
• Normative reference: EN 62471:2008-09 | IEC 62471:2006, modified
• LED risk group identification: Free group
• Wavelength: 850 nm
• Average life: Average life: 100,000 h at T_U = +25 °C
• Initialization time: 0.4 s ... 2 s
• Teaching time: 0.75 s .. 24 s
• Scan time, parallel beam: 1.1 ms
• Scan time, cross beam: 2.2 ms
• Reproducibility, parallel beam: 1 .1 ms
• Reproducibility, cross beam: 3.2 ms
• Minimum dwell time, parallel beam: 2.2 ms
• Minimum dwell time, cross beam : 4.3 ms
• Response time max., parallel beam: 3.1 ms
• Response time max., cross beam: 6.4 ms
• Minimum object size (MDO), parallel beam: 30 mm
• Minimum object size (MDO), 7 cross beams: ? 12 mm
• Minimum object width (MOW), 7 cross beams : 31%
• Baud rate: COM3 (230.4 kBaud)
• Max. cable length: 20 m
• Cycle time: 2.3 ms
• Process data length: 32 Byte
• Transmitter: ? 35.6 mA
• Receiver: ? 43.8 mA
• Number of digital outputs: 2
• Type: Push-pull mode: PNP/NPN
• Output signal voltage HIGH/ LOW: U_B-3 V/<3 V
• Output load, inductive: 1 H
• Output load, capacitive: 100 nF
• Output current I_max.: 100 mA
• Output current, remainder: < 0.5 mA
• Number of digital inputs: 1
• Input signal voltage HIGH/LOW: >15 V/<5 V
• Width: 11.8 mm
• Height: 224.2 mm
• Depth: 24.1 mm
• Cable diameter: 3.4 mm
• Cross-section of cores: 0.14 mmІ
• Cable length: 150 mm
• Cable material: PVC
• Discrete signal Q_L1: Switching output
• Discrete signal Q_L2: Switching output, External input
• Device status: Hardware error, temperature warning, operating hours warning
• Communication status: Contact short circuit error, invalid process data
• Light signal status: Learning error, synchronization error, quality-of-run alarm
• Warning output: Yes
• Beam distance : 25 mm
• Category: Switching automated light curtains
• Series: SLG-2