Sick TIM771S-2174104

2D-LiDAR Sensor

Sick TIM771S-2174104

Datasheet:

• Article: 1105052
• System part: Sensor
• Measuring principle: HDDM
• Application area: Indoor
• Source light: Infrared (850 nm)
• Laser class: 1 (IEC 60825-1:2014, EN 60825-1:2014)
• Scanning frequency: 15 Hz
• Angle resolution: 0.33°
• Working area: 0.05 m ... 25 m (at diffuse reflectance > 90%)
• Solution-oriented working range safety requirements: 0.05 m ... 5 m (at a diffuse reflection coefficient of 5%)
• Blind zone: 0 m ... 0.05 m
• Connection type: 1 x Ethernet connector, 4-pin M12 connector, 1 x Power connector, 12-pin M12 connector, 1 x Micro-USB socket, type B,
• Supply voltage: 9 V DC. .. 28 V DC
• Power consumption: Typ. 4 W, 16 W with 4 maximum loaded digital outputs
• Housing color: Yellow
• Protection type: IP67, only valid with the plastic Aux interface cover closed (IEC 60529:1989+AMD1: 1999+AMD2:2013)
• Protection class: III (IEC 61140:2016-1)
• Weight: 250 g, without connecting cables
• Dimensions (L x W x H): 60 mm x 60 mm x 86 mm
• Category: B (EN ISO 13849-1:2015)
• Performance level: PL b (EN ISO 13849- 1:2015)
• SRS/SRSS performance class: B (IEC TS 62998-1:2019)
• MTTF_D (mean time to failure causing hazardous condition): 100 years, at 25 °C ambient temperature (EN ISO 13849-1:2015)
• T_M (specified operating time): 20 years (EN ISO 13849-1:2015)
• Compliance: EN ISO 13849-1:2015, ANSI/ITSDF B56.5:2012, IEC TS 62998-1:2019, EN ISO 13842:2014, EN ISO 13855: 2010
• Rating: 1 scan, typ. 67 ms, 2 scans, ? 134 ms,
• Recognizable object shape: Almost any
• Systematic error: ± 60 mm
• Statistical error: < 20 mm, < 10 mm ,
• Integrated application: Analysis of protective fields with flexible fields, Output of measurement results
• Protective field tolerance: 100 mm, 0.66° (DIN CLC/TS 62046:2009 , with a diffuse reflectance coefficient of 5%)
• Number of fields: 16 Triple fields (48 protective fields)
• Simultaneous processing of cases: 3 joint protective fields (for each block of fields)
• Ethernet: ? , TCP/IP
• USB: ?
• Digital inputs: 4 (PNP, for switching field sets)
• Digital outputs: 3 (PNP, to indicate a violation of the protective field, additionally 1 for the “Device Ready” signal)
• Delay time: 67 ms ... 30,000 ms (configurable)
• Exposure time: 67 ms ... 600.052 ms (adjustable)
• Optical indication: 2 LEDs (ON, “Device Ready”)
• Diffuse reflection: ? 5% (Reflectors)
• Shock resistance: 50 g, 11 ms, ± 3 single impacts/axis, 25 g, 6 ms, ± 1000 multiple impacts/axis, 50 g, 3 ms, ± 5000 multiple impacts/axis,
• Operating temperature range: –25 °C ... +50 °C
• Storage temperature: –40 °C ... +75 °C
• Switch-on temperature: –10 °C ... +50 °C
• Temperature change: –25 °C ... +50 °C, 10 cycles
• Damp heat: +25 °C . .. +55 °C, 95% rF, 6 cycles
• Insensitivity to external light sources: 80,000 lx, 3,000 lx, in direct light,
• Application note: The TiM771S sensor is a product focused on solving safety problems in the following applications: protection of hazardous areas, hazardous locations and access areas, mobile vehicle protection (protection of automatically guided vehicles and mobile platforms), as well as vehicle localization. At any time, the sensor may only be used within the prescribed and specified technical specifications and operating conditions.
• Horizontal: 270°
• At 10% diffuse reflectance: 8 m
• Note: Micro-USB
• Function: Setup
• Emission: Residential (IEC 61000-6-3:2006+AMD1:2010)
• Immunity to EMI: Industrial environment (IEC 61000-6-2:2005)
• Sinusoidal resonance scan: 10 Hz ... 1.000 Hz
• Sinusoidal vibration test: 10 Hz .. 500 Hz, 5 g, 10 frequency cycles
• Noise test: 10 Hz ... 250 Hz, 4.24 g RMS, 5 h
• Operation: < 80% , non-condensing (EN 60068-2-30:2005)
• Storage: ? 90%, non-condensing (EN 60068-2-30:2005)

• Category:2D-LiDAR sensors
• Series:TiM7xx