Sick TR110-SLUSA00

Safety locking device

Sick TR110-SLUSA00

Datasheet:

• Article: 6034589
• Sensor operating principle: Transponder
• Locking principle: Normally open circuit principle
• Coding: Uniquely coded
• Starter force: ? 10 N
• Holding force: 20 N
• Unlocking force: ? 20 N
• Starter frequency: ? 0, 5 Hz
• Startup speed: ? 20 m/min
• Reliability class: SIL3 (IEC 61508), SILCL3 (EN 62061),
• Category: Category 4 (EN ISO 13849)
• Performance level: PL e (EN ISO 13849)
• PFHd (average probability of dangerous failure per hour): 4.1 x 10^{-9< /sup> (EN ISO 13849)}
• T_M (specified service life): 20 years (EN ISO 13849)
• Design type: Design type 4 (EN ISO 14119)
• Starter coding degree: High coding degree (EN ISO 14119)
• Safe state in case of error: At least one safety semiconductor output (OSSD) is in the state AUS (OFF).
• Reliable daisy chain: No, only individual wiring (with diagnostics)
• Connection type: M12 connector, 8-pin.
• Diagnostic indication: ?
• Status indication: ?
• Protection class: III (IEC 61140)
• Pollution degree: 3 (EN 60947-1)
• cULus classification: Class 2
• Consumption category: DC-13 (IEC 60947-5-1)
• Rated operating current (rated operating voltage): 150 mA (24 V DC), ,
• Rated insulation voltage U_i: 50 V
• Maximum permissible impulse voltage U_imp : 500 V
• Output type: Semiconductor outputs (OSSD) with self-monitoring
• Magnet power consumption: 6 W
• Magnet on-time: 100%
• Rating: ? 260 ms
• Unlock time: 400 ms
• On delay: 1 s
• Divergence time: ? 10 ms (EN IEC 60947- 5-3)
• Locking principle: Normally open circuit principle
• Weight: 0.42 kg
• Lifetime of mechanical components: 1 x 10⁶ operation cycles
• Protection type: IP67 (EN 60529), IP69K,
• Operating temperature range: –20 °C ... +55 °C
• Vibration resistance: 10 Hz ... 55 Hz (IEC 60068-2-6)
• Shock resistance: 30 g, 11 ms (EN 60068-2-27)
• EMC : EN IEC 60947-5-3
• With direct starter: 3,900 N (EN ISO 14119)
• With angle starter: 1,500 N (EN ISO 14119)
• With hinged starter: 2,600 N (EN ISO 14119)
• With direct starter: 3,000 N (EN ISO 14119)
• With angle starter: 1,100 N (EN ISO 14119)
• With hinged starter: 2,000 N (EN ISO 14119)
• Sensor: 24 V DC (20.4 V DC ... 27.6 V DC)
• Magnet: 24 V DC (20.4 V DC ... 26.4 V DC)
• Sensor: 40 mA
• Magnet: 400 mA
• Safety-compatible outputs: 2 semiconductor outputs (output switching devices), p-switched, short-circuit-proof
• Diagnostic outputs: P-switched, short-circuit-proof
• Safety-supported outputs: 1 mA ... 150 mA
• Diagnostic outputs: 1 mA ... 50 mA
• Switch head: Zinc die-casting
• Housing: Fiberglass reinforced thermoplastic
• Connectors: Nickel-plated brass
• Series:TR110 Lock
• Category:Safety locking devices
• Output type: semiconductor
• Type of connector: M12
• Connection type: connector