Sick WL27X-3P1831
Photoelectric sensors
- Classification: EX II 3G EX nA op is IIB T4 Gc X, EX II 3D EX tc IIIB T135°C Dc IP67 X according to Directive 94/9/EC (ATEX)
- Corresponds to category 3D/3G
- Conform to standards and ready-to-install: Sensor and additional protective housing (stainless steel 1.4301)
Item Number:
WL27X-3P1831
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
| Part Number | 1027989 |
| Hazardous area category: | 3D, 3G |
| Housing material: | ABS, Stainless steel, Stainless steel V2A (1.4301), Plastic |
| Weight: | 750 g |
| Light source: | LED |
| Ripple: | ≤ 5 Vpp |
| Optics material: | PMMA |
| Housing design (light emission): | Rectangular |
| Enclosure rating: | IP 67 |
| Dimensions (W x H x D): | 31.4 mm x 112.3 mm x 70.4 mm |
| Light spot size (distance): | ? 220 mm (10 m) |
| Angle of dispersion: | Ca. 1.5 ° |
| Supply voltage: | 10 V DC ... 30 V DC |
| Wave length: | 660 nm |
| Adjustment: | Potentiometer |
| Cable material: | PVC |
| Signal voltage PNP HIGH/LOW: | Approx. VS - 2.5 V / 0 V |
| Sensing range max.: | 0.1 m ... 15 m |
| Sensing range: | 0.1 m ... 11 m |
| Type of light: | Visible red light |
| Switching mode: | Light/dark switching |
| Response time: | ≤ 500 µs |
| Ambient storage temperature: | -40 °C ... 75 °C |
| Sensor/detection principle: | Photoelectric retro-reflective sensor |
| Protection class: | II |
| Power consumption: | ≤ 30 mA |
| ATEX marking: | EX II 3G EX nA op is IIB T4 Gc X EX II 3D EX tc IIIB T135°C Dc |
| Circuit protection: | A, B, C |
| Output function: | Complementary |
| Output current Imax.: | ≤ 100 mA |
| Switching frequency: | 1,000 Hz |
| Polarisation filter: | + |
| Ambient operating temperature: | -20 °C ... 50 °C |
| Switching output: | PNP |
| Connection type: | Cable, 4-wire, 10 m |
People also buy
Comments
No comments yet