Sick WSE27X-3P1830
Photoelectric sensors
- Classification: EX II 3G EX nA op is IIB T4 Gc X, EX II 3D EX tc IIIB T135°C Dc IP67 X according to Directive 94/9/EC (ATEX)
- Corresponds to category 3D/3G
- Conform to standards and ready-to-install: Sensor and additional protective housing (stainless steel 1.4301)
Item Number:
WSE27X-3P1830
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Specification:
| Part Number | 1027991 |
| Sensing range: | 0 m ... 25 m |
| Angle of dispersion: | Ca. 1.5 ° |
| Light source: | LED |
| Switching output: | PNP |
| Sensing range max.: | 0 m ... 35 m |
| Switching mode: | Light/dark switching |
| Cable material: | PVC |
| Type of light: | Visible red light |
| Signal voltage PNP HIGH/LOW: | Approx. VS - 2.5 V / 0 V |
| Weight: | 1,500 g |
| Wave length: | 645 nm |
| Switching frequency: | 1,000 Hz |
| ATEX marking: | EX II 3G EX nA op is IIB T4 Gc X EX II 3D EX tc IIIB T135°C Dc |
| Ambient operating temperature: | -20 °C ... 50 °C |
| Dimensions (W x H x D): | 31.4 mm x 112.3 mm x 70.4 mm |
| Supply voltage: | 10 V DC ... 30 V DC |
| Connection type: | Cable, 4-wire, 10 m |
| Light spot size (distance): | ? 600 mm (25 m) |
| Hazardous area category: | 3D, 3G |
| Enclosure rating: | IP 67 |
| Output current Imax.: | ≤ 100 mA |
| Angle of reception: | Ca. 3 ° |
| Protection class: | II |
| Ambient storage temperature: | -40 °C ... 75 °C |
| Sensor/detection principle: | Through-beam photoelectric sensor |
| Part number of individual components: | Receiver, WE27X-3P1830, 2033627, Sender, WS27X-3D1830, 2033628 |
| Housing design (light emission): | Rectangular |
| Optics material: | PMMA |
| Power consumption, sender: | 35 mA |
| Ripple: | ≤ 5 Vpp |
| Response time: | ≤ 500 µs |
| Housing material: | ABS, Stainless steel, Stainless steel V2A (1.4301), Plastic |
| Power consumption, receiver: | 20 mA |
| Output function: | Complementary |
| Circuit protection: | A, B, C |
People also buy
Comments
No comments yet