The KSA 035 BNS H MA SK is a high-precision rail guide from Bosch Rexroth made of carbon steel. It is designed for use in linear systems with high demands on accuracy, rigidity and reliability.
The KSA 020 SNS S MB 00 is a linear guide rail with ball bearing mechanism from Bosch Rexroth. It is made of hardened carbon steel with a hard surface for durability, precision and long service life.
- Comprehensive diagnostics for the fieldbus physical layer
- Module and motherboard for retrofit of any installation
- Precise measurements through passive circuits
- For commissioning, online monitoring and troubleshooting
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Installation in Zone 2/Class I, Div. 2
- System state and fault indication via LEDs
- Display of data in the safety of the control room
- Full software integration into PCS and PAM possible
- System integration kit for Advanced Diagnostics
- PCS integration via Diagnostic Manager or device DTM
- Simple automatic setup of Advanced Diagnostics
- Common alarm handling
- For FOUNDATION Fieldbus and PROFIBUS PA
- Installation in Zone 2
- System integration kit for Advanced Diagnostics
- PCS integration via Diagnostic Manager or device DTM
- Simple automatic setup of Advanced Diagnostics
- Alarm handling and integrated I/O for cabinet monitoring/control
- For FOUNDATION Fieldbus and PROFIBUS PA
- Installation in Zone 2
Complete hardware for connection of FOUNDATION Fieldbus H1 field devices to the host system of your choice
Complete hardware for connection of PROFIBUS PA field devices to a DP-Master
- Very low jitter (< 10 µs)
- Precise light spot
- Best contrast resolution thanks to RGB LED technology
- Very low jitter (< 10 µs)
- Precise light spot
- Best contrast resolution thanks to RGB LED technology
- Tough, metal housing
- Various teach-in methods via control panel or control cable
- Maximum detection reliability due to 3-color RGB LED technology
- Intuitive 10-segment bar graph display indicates detection status
- Static 2-point teach-in of mark and background via the control cable
- Maximum detection reliability due to 3-color RGB LED technology
- Intuitive 10-segment bar graph display indicates detection status
- Static 2-point teach-in of mark and background via the control cable
- Maximum detection reliability due to 3-color RGB LED technology
- Intuitive 10-segment bar graph display indicates detection status
- Static 2-point teach-in of mark and background via the control cable
- Maximum detection reliability due to 3-color RGB LED technology
- Wide range of operating distances between 30 mm and 800 mm
- Small and precise laser light spot (Class II)
- Fast switching frequency of 17 kHz
- Wide range of operating distances between 30 mm and 800 mm
- Small and precise laser light spot (Class II)
- Fast switching frequency of 17 kHz
- Wide range of operating distances between 30 mm and 800 mm
- Small and precise laser light spot (Class II)
- Fast switching frequency of 17 kHz
KTD 2-1 B14
- Solid shaft ø6 mm with synchro flange
- Max. 10000 pulses per revolution
- Centering alignment ø50 mm, mounting screw hole circle ø68 mm
- TTL or HTL output signals
KTD 4-... A 4 Y10
- Size (flange): ø88 mm
- Shaft type: Ø20...27 mm (through hollow shaft)
- Protection EN 60529: IP 65
- Very low jitter (< 10 µs)
- Precise light spot
- Best contrast resolution thanks to RGB LED technology
- Various heat-resistant fiber-optic cable models are available
- Various teach-in methods, including potentiometer
- Analog output
- Various heat-resistant fiber-optic cable models are available
- Various teach-in methods, including potentiometer
- Analog output
The Ball Transfer Unit KU N22 P MFK from Bosch Rexroth is a compact, modular component designed for moving loads over smooth surfaces. It consists of a housing, a set of steel balls, a sealant and a plastic backing plate.
kwd 025 fns c1 n 1
- Maximum dynamic load: 7,000 N
- Maximum speed: 5 m/s
- Acceleration: 20 m/s²
Capacitive sensor, Metal thread, M34 x 1.5, Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW, ATEX approval, Group II, category 1D/1G, Cable, Sensing range 15 mm [nf] adjustable
Capacitive sensor, Metal thread, M34 x 1.5, Connection to certified intrinsically safe circuits with the max. values U = 15 V / I = 50 mA / P = 120 mW, ATEX approval, Group II, category 1D/1G, Cable, Sensing range 15 mm [nf] adjustable
Locking unit for microcylinders
T2 (R) M18 P=10m / M12 4P
rexroth l40
- Power supply U: 24 V DC
- Power supply Umin ... Umax: 19 ... 30 V DC
- Umin ... Umax: 19 V DC ... 30 V DC
- Residual ripple: [±%]: 5
- Residual ripple: +/- 5%
- UL logic power supply: [VDC]: 7.5
- Max. [mA]: 2
- UL logic power supply: 7.5 V (transformed from external 24 V DC). Max. 2 A
- Logic, ULS segment power supply: [VDC]: 24