Ceraphant PTC31B pressure switch from Endress+Hauser

Ceraphant PTC31B pressure switch with ceramic vacuum sealed measuring cell for safe measurement and control of absolute and gauge pressure.

Ceraphant PTP33B absolute and gauge pressure sensor

pu1100

Automatic float air trap

The Hydraulic Gear Pump SEAL KIT PV7-1X/16M from Bosch Rexroth is a seal kit designed for hydraulic gear pumps of the PV7-1X series, size 16M. These seals guarantee the tightness of the pump, preventing leakage of hydraulic fluid.

  • Operating voltage 9.6...32 DC V
  • 2-wire
  • M12 Connector
  • Gold-plated contacts
  • PROFINET interface

  • Non-contact positioning on Data Matrix code tape

  • Mechanically rugged: no wearing parts, long operating life

  • maintenance-free

Service kit for RA/192000

r036050000

  • Screw type: ball bearing
  • Nut type: preloaded
  • Body material: aluminum
  • Protection: IP65
  • Operating temperature: from -20°C to +80°C

r044229401

  • Bearing type: Ball bearing
  • Number of bearings: 4
  • Bearing material: steel
  • Lubricant type: Lithium-based lubricant
  • Maximum load: 200 N
  • Static load: 400 N
  • Friction moment: 0.15 Nm

MINIATURE GUIDE RAIL RESIST NRII MSA-012-SNS-H-MA-00

MINIATURE GUIDE RAIL RESIST NRII MSA-015-SNS-H-MA-00

  • Working medium: Compressed air
  • Maximum inlet pressure: 17.2 bar
  • Working temperature: -20 ° C to + 66 ° C

Ball transfer units without felt seal – Size 8
KU-B8-OFK

Steel Ball Transfer

Ball transfer units without felt seal – Size 15
KU-B15-OFK

rexroth r053xx15xx

  • Dynamic load capacity C [N]: 500
  • Maximum permissible linear speed vmax [m/s]: 2

Ball Transfer

rexroth r053xx22xx

  • Material: Steel
  • Sealing: Rubber
  • Temperature range: from -20°C to +100°C

Standard LB, closed, 12, with two seals
KBM-12-DD

Linear Bushing

Standard LB, closed, 16, with two seals
KBM-16-DD

Bushing

Standard LB, closed, 30, with two seals
KBM-30-DD

Standard LB, closed, 8, with two seals
KBM-8-DD

Flange LB, flange, tandem, 20, with two seals
KBMFT-20-DD

Linear set (aluminum), C-40, with two seals, greased
LSAC-40-DD-G

Linear set (aluminum), A-25, with two seals
LSA-A-25-DD

Pneumatic rotary actuator. Pinion with ajustment (male). Fluid: filtered air (without or with lubrication)

Wiper seal (torque), d = 12, closed
SEAL RING 12

Ball Nut

Single nut with flange FEM-E-B, size 20 x 10R x 3?-?4
FEM-E-B 20X10RX3-4