• Operating voltage DC 4.75...30 V
• DC
• HTL/TTL
• M12 Connector

• Operating voltage DC 4.75...30 V
• DC
• HTL/TTL
• M12 Connector

• High-speed 3D with color up to 11kHz
• Up to 3,072 pixels resolution in color and 1,536 pixels in 3D
• Multi-linear: RGB + NIR + Monochrome (w / + w/o IR)

• High-speed 3D with color up to 11kHz
• Up to 3,072 pixels resolution in color and 1,536 pixels in 3D
• Multi-linear: RGB + NIR + Monochrome (w / + w/o IR)

• Solid shaft encoder
• Operating voltage DC 4.75...30 V
• DC
• HTL/TTL
• M12 Connector

rexroth rc2 2 21

• Operating voltage range: 18 - 32 V DC
• Maximum current consumption: 20 A
• Reverse polarity protection: yes
• Overload Protection: Yes
• Short circuit protection: yes

• art. 204715-0011
• Instruments in Zone 0...1/Div. 1
• Short circuit current limitation per output

Non-contact safety switches RE1

• Response range of up to 9 mm
• 1 NO/1 NC, 2 NO contacts or 3 NO contacts
• Up to performance level PL e / Cat. 4 (EN ISO 13849)

• Response range of up to 9 mm
• 1 NO/1 NC, 2 NO contacts or 3 NO contacts
• Up to performance level PL e / Cat. 4 (EN ISO 13849)

• Response range of up to 9 mm
• 1 NO/1 NC, 2 NO contacts or 3 NO contacts
• Up to performance level PL e / Cat. 4 (EN ISO 13849)

Omron Reflective Sensor

• Degree of protection: IP65 or IP67
• Body material: ABS plastic or metal

reflector omron

• High reflectivity
• Resistance to chemicals
• Impact resistance

Omron retro reflective sensor

Detection spot size:

• Standard models: from 1 mm to 50 mm
• Miniature models: from 0.5 mm to 2 mm
• Models with a large detection range: up to 10 m

ifm rewireable plug

• Body: polypropylene (PP)
• Contacts: brass
• Insulation: polyamide (PA)

rf1100

Brass male BSP float valve - Low pressure

• 13.56 MHz RFID write/read device for ranges up to 240 mm
• Transponder communication according to ISO/IEC 15693 standard
• Compact, industrial design with integrated antenna

• 13.56 MHz RFID write/read device for ranges up to 240 mm
• Transponder communication according to ISO/IEC 15693 standard
• Compact, industrial design with integrated antenna

ifm rfid io link

• Standards: ISO 15693, ISO 14443
• Protocols: IO-Link, Modbus TCP/IP, EtherNet/IP
• Software: moneo configure, LR DEVICE

• Compact UHF RFID read/write device with integrated antenna for scanning ranges of less than 1 m
• Standard-compatible transponder interface (ISO/IEC 18000-6C / EPC C1G2)
• Supports industry-standard data interfaces and fieldbuses, as well as PoE

• Compact UHF RFID read/write device with integrated antenna for scanning ranges of less than 1 m
• Standard-compatible transponder interface (ISO/IEC 18000-6C / EPC C1G2)
• Supports industry-standard data interfaces and fieldbuses, as well as PoE

• Compact UHF RFID read/write device with integrated antenna for scanning ranges of less than 1 m
• Standard-compatible transponder interface (ISO/IEC 18000-6C / EPC C1G2)
• Supports industry-standard data interfaces and fieldbuses, as well as PoE

• UHF RFID read/write unit for industrial applications
• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)

• UHF RFID read/write unit for industrial applications
• With or without integrated antenna, depending on the type (up to four external antennas can be connected)
• Standard-compliant transponder interface (ISO/IEC 18000-6C/EPC G2C1)

Measuring wheel. 200 mm. Without wheel.

 Encoder Measuring Wheel

Measuring wheel. 200 mm. With smooth wheel surface.