r165181320

• Maximum speed: 5 m/s
• Maximum acceleration: 500 m/s²
• Permissible ambient temperature: From -10°C to +80°C
• Guide rail material: Hardened and polished steel
• Hardness: 60 HRC

r165331420

• Maximum static load: 25 kN
• Torsional load moment: 100 Nm
• Permissible skew moment: 0.1 mNm
• Temperature range: from -20°C to +80°C
• Protection level: IP65

R2 SP IC4

• Relative humidity: 0...95% (without condensation)
• Body material: polycarbonate
• Trigger voltage: 10.5 V DC

r341603700

• Properties: waterproof, resistant to oxidation, does not melt, does not decompose
• Application: rolling, sliding bearings, guides, seals

Long-life ABB spare fan assembly for ACS drivers.

Omron R88M-WP1K530H-S1-D servo motor 200V and 1550W

• Discrete I/O module
• Cast aluminum housing, IP66
• FOUNDATION™ Fieldbus H1 compatible

r900017610

• Hardness: 70 Shor A
• Operating temperature: -20°C to +100°C

r900561180

• Degree of protection: IP65
• Body material: Aluminum
• Gasket material: NBR
• Certificates: CE, RoHS

rexroth r900561274

• Current consumption: 2.0 A
• Trigger time: 25 ms
• Electrical connector: DIN 43650

r900561282

• Operating temperature range: from -20°C to +80°C
• Fluid: Hydraulic oil ISO VG 32 - 46
• Viscosity: 32 - 46 cSt at 40°C
• Filtration: 10 microns
• Noise level: 70 dB (A) at maximum pressure and flow

rexroth r900561288

• Trigger mechanism: steel
• Sealing: fluororubber (FKM)
• Oil temperature: from -20°C to +80°C
• Oil viscosity: from 15 to 350 cSt (mm²/s)
• Fluid type: mineral oil

r900578535

• Valve volume: 2.5 cm³
• Pressure drop: 0.5 bar
• Cleanliness class: ISO 19/16
• Degree of protection: IP67
• Connection: DIN 4058

r900580381

• Minimum performance: 2.5 cm³/rev
• Maximum volume: 10 cm³/volume
• Nominal performance: 8 cm³/rev
• Volumetric efficiency: 90%
• Mechanical efficiency: 85%
• Ripple: 2%
• Noise level: 68 dB(A)

r900580382

• Maximum volume flow: 60 l/min
• Nominal volume flow: 40 l/min
• Minimum volume flow: 5 l/min
• Nominal pressure: 180 bar
• Efficiency: 90%

r900726604

• Operating temperature: from -20°C to +80°C
• Storage temperature: from -40°C to +80°C
• Protection class: IP67
• Body: aluminum
• Sealing: EPDM

r900727801

• Operating temperature: from -20°C to +80°C
• Maximum drain pressure: 10 bar
• It is recommended to use hydraulic oil with a viscosity of 15 to 350 cSt (mm²/s) at 40°C.

r900999t31 Rexroth Hydraulic Cylinder

• Elevation speed: 0.1 m/s
• Volume of the working chamber: 0.22 l
• Stem volume: 0.04 l
• Operating temperature: from -20°C to +80°C
• Fluid type: Hydraulic oil ISO VG 32
• Viscosity: from 20 to 100 cSt (at 40°C)

rexroth r901017022

• Maximum current: 10 A
• Nominal current: 2 A
• Nominal power: 230 VA
• Operating temperature: -20°C to +80°C
• Voltage withstand: 2500 V AC
• Insulation resistance: > 20 MΩ

r901048962

• Type: Hydraulic oil
• Viscosity class: VG 32 - VG 68
• Temperature: -40°C to +100°C
• Inlet: SAE 1/2"
• Outlet: SAE 3/4"
• Noise level: 70 dB
• Protection class: IP65

r901082015

• Nominal voltage: 24 V DC
• Current consumption: 2.5 A
• Trigger time: 20 ms
• Degree of protection: IP65

r901090799

• Sealing: NBR (butadiene-nitrile rubber) or EPDM (ethylene-propylene-diene rubber)
• Temperature of the working environment: From -20°C to +80°C
• Viscosity of the working fluid: From 15 to 350 cSt (mm²/s)

r901278761

• Component series: 5X (50...59)
• Model number: 4WE 10 E5X/EG24N9K4/M
• Electromagnet supply voltage: 24 V DC (40 W)
• Maximum pressure: 350 bar / 5076 psi. inch
• Connector: 3-pin DIN
• Sealing: NBR

r902602446

• Degree of protection: IP67
• Vibration resistance: DIN EN 60068-2-6
• Impact resistance: DIN EN 60068-2-7

r902602657

• Solenoid type: Proportional
• Control type: Electric
• Connector type: DIN 43650
• Body material: Aluminum
• Core material: Steel

r902603442

• Vibration resistance: Up to 10 g
• Impact resistance: Up to 50 g
• Certification: CE, RoHS

r911296724

• DC bus voltage: 700 V DC
• Nominal network frequency: 50-60 Hz
• Power factor: 0.98

r911339573

• Frequency: 50/60 Hz
• Power factor: 0.95
• Voltage regulation: ±1%
• Voltage ripple: <2%

r917008801

• Supply voltage: 24 V DC
• Current consumption: Up to 2 A
• Consumption: Up to 30 l/min
• Switching pressure: Adjustable from 5 to 350 bar
• Switching time: Less than 50ms

r925412023

• Drain pressure: 10 bar
• Drain volume: 20 l/min
• Maximum pressure in the case: 10 bar
• Maximum pressure in the tank: 10 bar