PSEN cs3.19n 1 switch

• Bending radius (when laying): K15 x Ø
• Drive type: PSEN cs3.19
• Possible to install the sensor in close proximity: Yes, Montagehinweis beachten
• Connection type: M12, 5-pin socket
• Cable lines: Li9Y11Y 8 x 0.14 mm2
• Body material: PBT

PSEN cs5.11 M12/8/PSEN cs5.11 M12 1unit

• Trigger range: 11 mm (with the activator in the square position)
• Travel margin: 8 mm (Sao)
• Residual stroke: 20 mm (Sar)
• Actuation force: < 5 N
• Trigger frequency: up to 50 Hz
• Vibration level: 10 g at 10 - 500 Hz
• Degree of impact: 30 g at 11 ms

Spare Ex-Solenoid

55 kw soft starter schneider

• Operating temperature range: -10°C to +50°C
• Degree of protection: IP20
• Type of terminals: Screw
• Cable cross-section: 25 mm²

• Suitable for Class I, II/Div. 2 for hazardous locations
• Certified for UL CSA
• Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
• Suitable for steel or plastic tubing
• Mounting hardware, pneumatic fittings and tubing included

• Suitable for Class I, II/Div. 2 for hazardous locations
• Certified for UL CSA
• Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
• Suitable for steel or plastic tubing
• Mounting hardware, pneumatic fittings and tubing included

• Suitable for Class I, II/Div. 2 for hazardous locations
• Certified for UL CSA
• Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
• Suitable for steel or plastic tubing
• Mounting hardware, pneumatic fittings and tubing included

• Suitable for Zone 2&22
• ATEX & IECEX certifications
• Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
• Suitable for steel or plastic tubing
• Mounting hardware, pneumatic fittings and tubing included

• Suitable for Zone 2&22
• ATEX & IECEX certifications
• Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
• Suitable for steel or plastic tubing
• Mounting hardware, pneumatic fittings and tubing included

• Suitable for Zone 2&22
• ATEX & IECEX certifications
• Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
• Suitable for steel or plastic tubing
• Mounting hardware, pneumatic fittings and tubing included

Promag 55S80, DN80 3" 

• 56-IS10
• Pressure Switch
• Reed Switch Type
• ATEX category 3 - II 3GD

PSEN me1M / 1AR

• Body material: Metal (usually stainless steel)
• Installation: On the surface
• Temperature range: Depends on the modification, but usually from -25°C to +70°C
• Vibration resistance: High
• Noise: Low level

PSEN ml b 1.1 unit

• Bend radius (when laying) K1: 5 x Ø  
• Escape release available: No  
• Type: 1 actuator PSEN ml 1.1  
• Connection type: M12, 8-pin male  

PSEN ml b 1.1 switch

• Number of OSSD outputs 2
• Number of sig. outputs 1
• Potential isolation S/C O No
• S/C output short circuit proof Yes
• Utilisation cat. to EN 60947-1 DC-13

PSEN ml b 2.1 unit

• Operating Temperature: 0 to 60°C
• Storage Temperature: According to EN 60068-2-1/-2
• Humidity: 93% relative humidity at 40°C
• EMC: Compliant with EN 55011, EN 60947-5-3, and EN 61326-3-1

PSEN ml b 2.1 switch

• Operating temperature: 0 to 60°C
• Storage temperature: According to EN 60068-2-1/-2
• Humidity: 93% r.h. at 40°C
• Vibration and shock: Compliant with EN 60068-2-6, 130g shock

PSEN ml s 1.1 unit

• Principle of operation: Transponder
• ISO 14119 Coding Level: Low
• Classification according to EN 60947-5-3: PDDB
• Transponder encoding type: Encoded
• Reset Type: Power Reset
• Possibility of serial connection: Yes

PSEN ml escape release

• Built-in position sensor
• Ability to connect to external devices
• Diagnostic functions

PSEN sl-0.5p 2.1 / PSEN sl-0.5 1unit

• Electrical connection: 8-pin M12 connector
• Holding force: 500 N
• Material of the actuator: Stainless steel
• Degree of protection of the actuator: IP67
• Number of outputs: 2

PSEN sl-0.5p 2.2 / PSEN sl-0.5 1unit

• Product type: Magnetic safety gate system
• Assured release distance: 8.0 mm
• Certifications: CE, cULus Listed, EAC (Eurasian), TÜV
• Dimensions: 45 mm x 122 mm x 44 mm

PSEN sl-0.5n 1.1 / PSEN sl-0.5 1unit

• Inputs: 1
• Outputs: 2 OSSD outputs
• Short circuit proof: Yes
• Utilization category: DC-12
• Ambient temperature: -25 to 55 °C
• Storage temperature: -25 to 70 °C

PSEN sl-0.5p 2.1 1switch

• S/C output short circuit proof: Yes
• Utilisation cat. to EN 60947-1: DC-12
• Ambient temperature standard: EN 60068-2-14
• Ambient temperature: -25 - 55 °C
• Storage temperature standard: EN 60068-2-1/-2
• Climatic suitability standard: EN 60068-2-78
• Humidity rating: 93 % r. h. at 40 °C

PSEN sl-0.5p 1.1 / PSEN sl-0.5fm 1unit

• Protection type: IP67
• Holding force: 500 N
• Max. vertical offset: 5 mm
• Max. angular offset: 2.5 degrees
• Ambient temperature: -25 to 55 °C  
• Humidity: 93% RH at 40 °C

PSEN sl-0.5p 3.1 / PSEN sl-0.5 1unit

• Safety level: SIL3/PL e/Cat4
• Sensor principle: Transponder
• Coding level: ISO 14119
• Classification: EN 60947-5-3
• Transponder coding: Coded
• Suitable for series connection: Yes
• Sensor can be flush-mounted: Yes (with installation note)
• Cable lines: LiYY 8 x 0.25 mm²
• Housing material: PBT

PSEN sl-1.0p 1.1 / PSEN sl-1.0 1unit

• Type: Safety locking device
• Model: PSEN sl-1.0p 1.1 / PSEN sl-1.0 1unit
• Function: Electromagnetic guard locking
• Coding: Coded
• Actuator: Standard
• Holding force: 1000 N  

PSEN sl-1.0p 1.1 1switch

• Actuator types: PSEN sl-1.0 1.1 (Type 1), PSEN sl-1.0fm 1.1 (Type 2)
• Flush mounting: Yes, with mounting instructions
• Connection type: M12, 8-pin male  
• Cable: LiYY 8 x 0.25 mm²
• Housing material: PBT (upper part), anticorodal, hard anodized (base plate)  

PSEN sl-1.0p 1.1 VA 1switch

• Holding force magnet on: 1000 N
• Max. vertical offset: 5 mm
• Max. angular offset: 2.5 deg
• Type 1 actuator: PSEN sl-1.0 VA
• Sensor can be flush-mounted: Yes, observe mounting instructions
• Connection type: M12, 8-pin male
• Cable lines: LiYY 8 x 0.25 mm²
• Housing material upper part: PBT
• Material of base plate: Stainless steel 1.4301

PSEN sg2c-3LPE unit

• Power Supply: 24 VDC
• Outputs: Safe outputs (OSSD) for controlling actuators
• Inputs: Inputs for safety sensors (light curtains, pressure mats, etc.)
• Enclosure Rating: IP54
• Temperature Range: -20°C to +55°C

PSEN sg2 actuator

• Ambient temperature: -20 to 55 °C (standard EN 60068-2-14)
• Storage temperature: standard EN 60068-2-1/-2
• Climatic suitability: standard EN 60068-2-78