IFM Safety sensors

Choose a subcategory:

Show all categories

AS-i safety monitor, 1 safety-related output, Basic version, 1-channel, Configuration and setup by configuration software ASIMON, Screw terminal

AS-i safety monitor, 2 safety-related outputs, Basic version, 2-channel, Configuration and setup by configuration software ASIMON, Screw terminal

AS-i safety monitor, 1 safety-related output, Extended functionality, 1-channel, Configuration and setup by configuration software ASIMON, Screw terminal

AS-i safety monitor with 2 safety-related outputs and 2-channel. Extended functionality.

AS-i safety monitor, 1 safety-related output, Extended functionality and integrated safe slave for triggering a safe AS-i output, 2-channel, Configuration and setup by configuration software ASIMON V3.0, Screw terminal

AS-i safety monitor, 2 safe semi-conductor outputs, SIL 3 to EN 62061, IEC 61508 / , SIL 3 and EN ISO 13849 - 1 / PL e, Chip card to save the configuration data, Configuration and setup by configuration software ASIMON V3 G2, USB 2.0 interface, Chip card and Combicon screw terminals supplied with the device, Screw terminal

AS-i Profinet gateway with safe preprocessing, Housing for DIN rail mounting, 4 safe local inputs (dual channel) and 4 safe local semiconductor outputs, Ethernet configuration interface with dynamic web interface for configuration and diagnosis including remote maintenance, Profinet RT device class B, LCD colour display, Integrated safety and non safety PLC, Configuration and setup by configuration software CODESYS V3

AS-i EtherNet/IP gateway with safe preprocessing, Housing for DIN rail mounting, 4 safe local inputs (dual channel) and 4 safe local semiconductor outputs, Ethernet configuration interface with dynamic web interface for configuration and diagnosis including remote maintenance, LCD colour display, Integrated safety and non safety PLC, Configuration and setup by configuration software CODESYS V3

  • AS_Interface_EtherCAT_Gateway_mit_SPS
  • Operating voltage DC 18...32 V
  • DC
  • use as AS-i EtherCAT gateway with safe preprocessing

Safety standstill monitor for overspeed detection, Relay, Evaluation system for safe standstill monitoring, without start-up monitoring, for 2 pnp switching sensors, 4 switch points selectable, Error message

Safe speed monitor for underspeed detection, Relay, Evaluation system for safe speed monitoring, for 2 pnp switching sensors, Diagnostic and fault output, Adjustable frequency range 0.5...990 Hz / speed range 1...49500 rpm

PCB 2M PANEL

Safety relay, Relay, Terminal block Phoenix Contact MSTBO, For the connection of electronic and mechanical fail-safe sensors/switches and for use as two-hand control

Fail-safe inductive sensor, Metal thread, M18 x 1, DC, M12 connector

Fail-safe inductive sensor, Metal thread, M18 x 1, DC, M12 connector

Fail-safe inductive sensor, Metal thread, M30 x 1.5, DC, M12 connector

Fail-safe inductive sensor, Metal thread, M30 x 1.5, DC, M12 connector

Fail-safe inductive sensor, Metal thread, M30 x 1.5, DC PNP, M12 connector

Fail-safe inductive sensor, Rectangular, plastics, DC, M12 connector

Fail-safe inductive sensor, Rectangular, plastics, DC, M12 connector

Fail-safe inductive sensor, Rectangular, plastics, DC PNP, M12 connector

Fail-safe inductive sensor, Rectangular, plastics, DC PNP, M12 connector

Safety light curtain, Length: 813 mm, DC PNP, Complies with the requirements:, type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1), Connector, 2 x PNP

Safety light curtain, Length: 963 mm, DC PNP, Complies with the requirements:, type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1), Connector, 2 x PNP

Safety light curtain, Length: 1113 mm, DC PNP, Complies with the requirements:, type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1), Connector, 2 x PNP

Safety light curtain, Length: 1263 mm, DC PNP, Complies with the requirements:, type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1), Connector, 2 x PNP

Safety light curtain, Length: 1413 mm, DC PNP, Complies with the requirements:, type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1), Connector, 2 x PNP

Safety light curtain, Length: 1563 mm, DC PNP, Complies with the requirements:, type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1), Connector, 2 x PNP

  • Safety light curtain
  • Length 1863 mm
  • Operating voltage 24 DC V
  • PNP
  • M12 Connector

Safety light curtain, Length: 1263 mm, DC PNP, Complies with the requirements:, type 4 (IEC 61496-1), SIL 3 (IEC 61508), SILcl 3 (IEC 62061), PL e (EN ISO 13849-1), Connector, 2 x PNP

Protection actuators are necessary for the organization of the safety system of production processes and protection of working equipment.

Sensors are designed to monitor hazardous areas and give an alarm to control the operation of the equipment. Safety sensors respond to changes in the state of the equipment and its environment and, when critical values are reached, generate output signals transmitted to the working equipment. The result of the operation can be the inclusion or disconnection of certain types of equipment, switching it to another mode of operation, informing the operator and personnel.

What are Electronic Safety Sensors?

Safety system transducers are sensors that serve to stop the operation of equipment in emergency situations that are dangerous to humans.

Scope of application of keeping detectors

Safety actuators are used in almost all modern industrial enterprises within the pale of different automatic verification schemes:

  • extra malfunction systems for equipment and machines,
  • systems of controlled emergency shutdown of equipment and machines,
  • equipment restart prevention systems,
  • Emergency Start Prevention Systems,
  • safety systems for repair and maintenance of machinery and mechanisms,
  • control systems for movable and removable fences: gates, doors, gate valves, etc.,
  • conveyor safety systems,
  • open hazardous area control systems,
  • configure access to open zones,
  • systems for safe operation of equipment: machines, machines, presses, etc.,
  • electrical protection systems for equipment and personnel,
  • anti-leak and flood protection systems.

As a rule, many production processes require the use of safety sensors in a comprehensive manner to solve several safety tasks at once. In various industries, only certain types of systems based on safety sensors can be used. The most commonly used safety and fire alert systems.

Reliability actuators allotted for:

  • provision the safe flow of work processes,
  • protection of working personnel,
  • safety of working equipment.

The use of such safety sensors allows you to warn in time, and when it occurs, quickly prevent various dangerous situations.

The category of safety sensors involves:

  • Move detectors
  • Smoke
  • Flooding
  • Leaks
  • Broken glass and others.

Depending on the need to detect various objects, inductive, optoelectronic, acoustic, ultrasonic and other sensors can be used. This group also includes translation and multifunctional keeping controllers.

IFM Safe sensor

Miscarry-securely inductive transducers

  • Ticket to EN 60947-5-3 for electromechanical control equipment
  • Provision operator and engine safety
  • No extra drive unit for electronic fail-securely sensors needed
  • Compound to security plc or safe AS-i mod
  • Range contact of actuators and communications possible

Reliability shine curtains

  • Dependable vindication of unsafe fields and flaps
  • Large variety selectable on the device
  • No bung space whenestablished in L form
  • Light contact via the approved-and-examined M12 joint

Security light grids

  • Safe protection of risky areas and dampers
  • Releases for the use in sanitary supplements
  • Versions with dynamic/dormant frame

RFID-coded and magnetically encoded security transducers

  • Actuation probable from sundry routes
  • Can be coupled in parts
  • Hide abaft rustproof steel for increased tamper prevention