Pepperl+Fuchs Explosion Protection
Choose a subcategory:
Show all categories
- 1-channel signal conditioner
- 24 V DC supply
- Input for 2- or 3-wire sensors or AC/DC voltage sources
- Relay contact output
- Timer function
- Configurable by DIP switches
- Connection via screw terminals
- 1-channel signal conditioner
- 24 V DC supply
- Input for 2- or 3-wire sensors
- Input frequency 10 mHz ... 50 kHz
- Relay contact output
- Start-up override and restart inhibit
- Configurable by DIP switches and software
- Connection via screw terminals
- 1-channel signal conditioner
- 24 V DC supply
- Thermocouple, RTD, potentiometer or mV input
- Input for PTC thermistor
- Current and voltage output
- Line fault (LFD) and sensor burnout detection
- Accuracy 0.1 %
- Connection via screw terminals
- 1-channel signal conditioner
- Field side loop powered
- Current input/output 0/4 mA ... 20 mA
- Accuracy 0.1 %
- Reverse polarity protection
- Connection via screw terminals
- 2-channel signal conditioner
- Field side loop powered
- Current input/output 0/4 mA ... 20 mA
- Accuracy 0.1 %
- Reverse polarity protection
- Connection via screw terminals
- Pluggable, mounts between device coupler and spur cable
- Intrinsically safe (Ex ia), FISCO, Entity, DART Fieldbus, or general-purpose
- Optional diagnostics for wear
- Grounding of shield via gas-discharge tube
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Indication via LED and Advanced Diagnostics
Accessory
Accessory
- Locate an operator workstation up to 120 m from server or pc
- Operate keyboard, mouse, and monitor safely in a Div 2 hazardous area
- Transparent operation between computer and monitor
- Automatic skew compensation
- Locate an operator workstation up to 400 m from server or pc
- Operate keyboard, mouse, and monitor safely in a Div 2 hazardous area
- Automatic skew compensation
- Supports multimode fiber-optic cables
- Locate an operator workstation up to 300 m from server or pc
- Operate keyboard, mouse, and monitor safely in a Div 2 hazardous area
- Easy installation and operation
- Connection of TERMEX units as Siemens MPI Slave at the Siemens S7 MPI Bus
- Conversion of the 3964/RK512 protocol in MPI and vice versa
- No settings or configuration at the Siemens S7 necessary
- Variable baud rate at the 3964R/RK512 end
- 1- or 2-channel Division 2 non-incendive barrier
- Div 2/Zone 2 mountable
- USB or PS2 interface for Ex-rated keyboard or mouse
Fieldbus Barrier
Fieldbus Barrier
Accessory
Accessory