Pepperl+Fuchs Products Other
- Hall Effect Sensor
- Sensing range 2.5 mm
- 4-wire DC
- Ferromagnetic actuated reed switch
- Detects ferrous metal through nonferrous metal
- One piece housing
- E1-Type approval
- Analog output 4 mA ... 20 mA
- Fixed evaluation limits
- High shock resistance
- Teachable zero point
- Measuring range -2 g ... +2 g
- Increased noise immunity 100 V/m
- E1-Type approval
- Analog output 4 mA ... 20 mA
- Fixed evaluation limits
- High shock resistance
- Teachable zero point
- Measuring range -2 g ... +2 g
- Increased noise immunity 100 V/m
- Low-profile, high resolution light grid for monitoring locking edges on elevators and accesses
- Thru-beam light grid with integrated controller
- In accord with EN81-70 and EN12015/16
- Dense monitoring field with up to 135 beams ensures that small objects are detected
- Object detection up to distance of zero
- Automatic beam crossing
- Insensitive to reflection and ambient light
- Low-profile, high resolution light grid for monitoring locking edges on elevators and accesses
- In accord with EN81-20 and EN81-70
- Dense monitoring field with up to 135 beams ensures that small objects are detected
- Object detection up to distance of zero
- Automatic beam crossing
- Test input
- Insensitive to reflection and ambient light
- Bright, high contrast 5-digit LED indicator
- Leading zero suppression
- Adjustable decimal point
- Maximum- and minimium-value display
- 2 adjustable trip values
- 2 relay outputs
- Operation via keypad
- Characteristic programmable via 12 interpolation points
- Resetting the outputs, automatic, manual or with external signal
- Connection via plug-in screw terminals
- Auxiliary power output for sensors
- Degree of protection IP65 in accordance with DIN EN 60529 (front only)
- Shock resistance in accordance with DIN EN 60068-2-27
- Vibration resistance in accordance with DIN EN 60068-2-6
- System hum suppression
- 2 adjustable trip values
- 2 relay outputs
- Operation via keypad
- Characteristic programmable via 12 interpolation points
- Resetting the outputs, automatic, manual or with external signal
- Connection via plug-in screw terminals
- Auxiliary power output for sensors
- Degree of protection IP65 in accordance with DIN EN 60529 (front only)
- System hum suppression
- 8 bit parallel data transfer
- Very large angle of divergence
- Can be connected in series
- Connection with spring-loaded terminals
- Degree of protection IP67
- 8 bit parallel data transfer
- Very large angle of divergence
- Can be connected in series
- Connection with spring-loaded terminals
- Degree of protection IP67
- 8 bit parallel data transfer
- Very large angle of divergence
- Can be connected in series
- Connection with spring-loaded terminals
- Degree of protection IP67
- 8 bit parallel data transfer
- Very large angle of divergence
- Can be connected in series
- Connection with spring-loaded terminals
- Degree of protection IP67
- Compact, flat aluminum housing
- 3 interfaces in a device can be selected via DIP switches
- Infrared light
- Mating connector with protective cover included delivery
- Diffuse mode sensor for recording colored print marks on backgrounds with different colors
- Color detection by means of the active three-range method
- TEACH-IN procedure for automatic threshold value setting
- 3 independent channels
- 3 tolerance steps per channel
- 3 Push-pull outputs
- Diffuse mode sensor for recording colored print marks on backgrounds with different colors
- Color detection by means of the active three-range method
- TEACH-IN procedure for automatic threshold value setting
- 3 independent channels
- 3 tolerance steps per channel
- 3 Push-pull outputs
- Diffuse mode sensor for recording colored print marks on backgrounds with different colors
- TEACH-IN procedure for automatic threshold value setting
- 3 emitter colors: green, red and blue
- Very short response time
- Sturdy, waterproof plastic housing
- Diffuse mode sensor for recording colored print marks on backgrounds with different colors
- TEACH-IN procedure for automatic threshold value setting
- 3 emitter colors: green, red and blue
- Very short response time
- Optical system exchangeable by 90В°
- Sturdy, waterproof plastic housing
- Laser print mark contrast sensor for recording very small print marks
- Large focus depth range from 3 mm ... 300 mm
- Laser class 2, eyesafe
- Adjustable sensitivity
- 30 micro-s response time, suitable for extremely rapid scanning processes
- Laser print mark contrast sensor for recording very small print marks
- Large focus depth range from 3 mm ... 300 mm
- Laser class 2, eyesafe
- Adjustable sensitivity
- 30 micro-s response time, suitable for extremely rapid scanning processes
- Diffuse mode sensor for recording any print mark
- TEACH-IN, static and dynamic
- 50 micro-s response time, suitable for extremely rapid scanning processes
- 3 emitter colors: green, red and blue
- Diffuse mode sensor for recording any print mark
- Static TEACH-IN: automatic switching threshold adaptation
- 30 µ-s response time, suitable for extremely rapid scanning processes
- 3 emitter colors: green, red and blue
- Diffuse mode sensor for recording any print mark
- Static TEACH-IN: automatic switching threshold adaptation
- Optical system exchangeable by 90В°
- 30 micro-s response time, suitable for extremely rapid scanning processes
- 3 emitter colors: green, red and blue
- Diffuse mode sensor for recording any print mark
- Static TEACH-IN: automatic switching threshold adaptation
- Optical system exchangeable by 90В°
- 30 micro-s response time, suitable for extremely rapid scanning processes
- 3 emitter colors: green, red and blue
- Time function
- Diffuse mode sensor for recording any print mark
- Static TEACH-IN: automatic switching threshold adaptation
- Optical system exchangeable by 90В°
- 30 micro-s response time, suitable for extremely rapid scanning processes
- 3 emitter colors: green, red and blue