Pepperl+Fuchs Inductive Proximity Sensors

Choose a subcategory:
Show all categories

Inductive sensor

  • No unusable area

  • 5 mm flush

  • Use of standard metallic actuating surfaces

FL2B 2J6 E

  • LED status indicator
  • Reverse polarity protection
  • CE, cULus, EAC certification

FL2B 4J6 E

  • Switching voltage: ≤ 250 V DC
  • Maximum switching current: ≤ 2 A
  • Residual current: ≤ 10 μA
  • Trigger time: ≤ 0.2 ms
  • Reset time: ≤ 0.1 ms
  • Reverse polarity protection: yes
  • Short circuit protection: yes

NBN2 8GM50 E2

  • Output current: max. 200 mA
  • Voltage drop: ≤ 1.5 V
  • Short circuit protection: impulse
  • Trigger time: ≤ 0.2 ms
  • Trigger time: ≤ 0.2 ms
  • Hysteresis: ≤ 0.1 mm

NBN3 F69 E2 V1 Y109463

  • Reverse polarity protection: Yes
  • Short circuit protection: Yes
  • Trigger time: ≤ 0.2 ms
  • Release time: ≤ 0.1 ms
  • Installation: Threaded

NBxx F58A3x3 E8 V1

  • Body material: PA 12 GF 50
  • Operating temperature: -20...85 °C
  • Protection class: IP67

Series: Cylindrical type, Housing diameter: 18 mm, Housing material: Stainless steel 1.4305 / AISI 303, Rated operating distance: 1.5 mm, Connection type: cable PVC , 2 m, Output type: 3-wire, Installation: flush, Type of voltage: DC

Series: Cylindrical type, Housing diameter: 18 mm, Housing material: Stainless steel 1.4305 / AISI 303, Rated operating distance: 5 mm, Connection type: Connector M12 x 1 , 4-pin, Output type: 2-wire, Installation: flush, Type of voltage: DC

PG5 05P55

  • Switching voltage: 24 V DC
  • Maximum switching current: 200 mA
  • Switching time: < 0.5 ms
  • Short circuit protection: Yes
  • Reverse polarity protection: Yes
  • Status indication: LED indicator

nbb5 18gm50 e3

  • Nominal current: 200 mA
  • Residual current: ≤ 1 mA
  • Switching frequency: max. 1950 Hz
  • Voltage drop: ≤ 2 V
  • Reverse polarity protection: Yes
  • Short circuit protection: Yes
  • Status indication: Yellow LED

nbn50 l2k a2 v1

  • Output current: Max. 2 A
  • Trigger time: < 0.5 ms
  • Trigger time: < 1 ms

nbn50 l2k e2 v1

  • Trigger frequency: 0...40 Hz
  • Output current: 200 mA
  • Activation delay: < 2 ms
  • Reset time: < 2 ms
  • Switching voltage: 24 V DC
  • Analog output 1 mA ... 5 mA/ 0 V ... 5 V
  • 0...6 mm quasi flush
  • Magnet Actuator
  • Compatible with 40FR1.. Series

Series: Rectangular type, Housing diameter: 10 mm, Housing material: PA, Rated operating distance: 2 mm, Connection type: Solder connection, Output type: 2-wire, Installation: flush, Type of voltage: DC

  • Basic series
  • 5 mm non-flush
Housing diameter: 10.8 mm, Housing material: Polyamides, Rated operating distance: 5 mm, Connection type: 3-pin solder connection, Installation: non-flush, Type of voltage: DC
  • Inductive analog
  • Voltage output

Series: Cylindrical type, Housing diameter: 30 mm, Housing material: stainless steel (303/1.4305), Rated operating distance: 7 mm, Connection type: cable PVC , 2 m, Output type: 2-wire AC/DC, Installation: flush