Pepperl+Fuchs
Choose a subcategory:
Show all categories
- Rectangular, corner-cube reflector
- Temperature range: -4 В°F to +140 В°F
- Mounting holes for simple installation
- Reflective foil, square
- Foil cannot be cut
- Microstructure, rectangular, corner-cube
- For 20 analog or 40 digital channels
- Sensors in Zone 0/Div. 1 (depending on module assembly)
- Installation in Zone 2, Div. 2 or safe area
- HART communication via service bus
- For FOUNDATION Fieldbus H1
- Configured via the process control system
- Non-volatile memory for configuration and parameter settings
- Quick communication set-up
- Permanently self-monitoring
- Outputs drive to safe state in case of failures
- Module can be exchanged under voltage
- 16-channel
- Connection board for K-System HART Multiplexer
- Interface for parallel connections
- Connection via spring terminals
- System board for Triconex
- HART Termination Board (ETP) for Tricon v10 AI module
- For 16-channel AI cards 3700, 3700A, 3703E and 3721
- 16-channel
- Field side: screw terminals, green
- Control side: ELCO socket, 56-pin
- System board for Triconex
- HART Termination Board (ETP) for Tricon AO module
- For 8-channel AO card 3805E
- 8-channel
- Field side: screw terminals, green
- Control side: ELCO socket, 56-pin
Series: Rectangular type, Housing material: brass, zinc plated, Rated operating distance: 7 mm, Connection type: cable PUR , 2 m, Output type: 2-wire, Installation: flush, Type of voltage: DC, ATEX 3G
- 1-channel
- Field mount module
- frac12- NPT thread
- Stainless steel housing
- Max. surge current (8/20 micro-s) 20 kA
- 500 V isolation from earth
- Suitable for hazardous area
- For any PROFIBUS interface, e.g. Remote I/O, valves, drives, inverters, motors, controllers etc.
- Full galvanic isolation between field and control room
- No sparks capable of ignition or hot surfaces due to low light energies
- Automatic baud rate detection
- Star, ring, or line topology selectable
- Bridging of great distances while maintaining high transmission rates
- Aluminum and stainless steel enclosures
- Ex de and Ex tb certified
- Integration of electrical components and operating elements in Ex d enclosures as per customer specification
- Customizable configuration of operators, terminals and cable entries as per specification
- Various enclosure size and design variants
- Installation in Zone 1, Zone 2, Zone 21 and Zone 22
- Choice of viewing windows for monitoring instruments
Flameproof Solution
- 1-channel
- Field mount module
- M20 x 1.5 thread
- Stainless steel housing
- Max. surge current (8/20 micro-s) 20 kA
- 500 V isolation from earth
- Suitable for hazardous area
- DC jack with lock mechanism
- Package includes EU-type F and US-type B power cords and hook-and-loop fastener
