Pilz PSEN Safety switches
PSEN sl-0.5p 3.1 / PSEN sl-0.5 1unit
- Safety level: SIL3/PL e/Cat4
- Sensor principle: Transponder
- Coding level: ISO 14119
- Classification: EN 60947-5-3
- Transponder coding: Coded
- Suitable for series connection: Yes
- Sensor can be flush-mounted: Yes (with installation note)
- Cable lines: LiYY 8 x 0.25 mm²
- Housing material: PBT
PSEN sl-1.0p 1.1 / PSEN sl-1.0 1unit
- Type: Safety locking device
- Model: PSEN sl-1.0p 1.1 / PSEN sl-1.0 1unit
- Function: Electromagnetic guard locking
- Coding: Coded
- Actuator: Standard
- Holding force: 1000 N
PSEN sl-1.0p 1.1 1switch
- Actuator types: PSEN sl-1.0 1.1 (Type 1), PSEN sl-1.0fm 1.1 (Type 2)
- Flush mounting: Yes, with mounting instructions
- Connection type: M12, 8-pin male
- Cable: LiYY 8 x 0.25 mm²
- Housing material: PBT (upper part), anticorodal, hard anodized (base plate)
PSEN sl-1.0p 1.1 VA 1switch
- Holding force magnet on: 1000 N
- Max. vertical offset: 5 mm
- Max. angular offset: 2.5 deg
- Type 1 actuator: PSEN sl-1.0 VA
- Sensor can be flush-mounted: Yes, observe mounting instructions
- Connection type: M12, 8-pin male
- Cable lines: LiYY 8 x 0.25 mm²
- Housing material upper part: PBT
- Material of base plate: Stainless steel 1.4301
PSEN sg2c-3LPE unit
- Power Supply: 24 VDC
- Outputs: Safe outputs (OSSD) for controlling actuators
- Inputs: Inputs for safety sensors (light curtains, pressure mats, etc.)
- Enclosure Rating: IP54
- Temperature Range: -20°C to +55°C
PSEN sg2 actuator
- Ambient temperature: -20 to 55 °C (standard EN 60068-2-14)
- Storage temperature: standard EN 60068-2-1/-2
- Climatic suitability: standard EN 60068-2-78
PSEN op2S-1-1
- Operating temperature: from -25°C to +55°C.
- Climatic resistance: complies with the EN 60068-2-3 standard.
- Air humidity: up to 95% relative humidity at a temperature of 40°C.
- Vibration resistance: complies with EN 60068-2-6.
- Impact resistance: withstands an impact load of up to 30g.
PSEN op4S-1-2
- Supply voltage: 10 ... 30 VDC
- Current consumption: max. 150 mA
- Output signal: PNP or NPN selectable
- Switching capacity: max. 200 mA
- Voltage drop: max. 2 V
- Reverse polarity protection: Yes
- Short-circuit protection: Yes
PSEN op2H-s-30-060/1
- Operating temperature: 0 - 55 °C
- Relative humidity: 95% at 40 °C
- Condensation: Not allowed
PSEN op4F-s-14-030/1
- Operating temperature: 0 - 55 °C
- Relative humidity: 95% at 40 °C
- Condensation: not allowed
- Degree of protection: IP67 (according to the EN 60529 standard)
- Vibration resistance: according to EN 60068-2-6
- Impact resistance: 10g as standard
PSEN op4H-s-30-060/1
- Relative humidity: 95% at 40 °C
- Condensation: Not allowed
- Vibration resistance: Meets EN 60068-2-6 standard
- Impact resistance: 10g
PSEN op4H-s-30-090/1
- Supply voltage: 24 V DC
- Protection type, housing: IP67
- Application in accordance with: CLC/TS 61496-2; EN 61496-1
- Ambient temperature: 0 - 55 °C
PSEN op4H-s-30-120/1
- Number of OSSD Outputs: 2
- Climatic Suitability Standard: EN 60068-2-3
- Humidity Rating: 95 % r.h. at 40 °C
- Condensation Permitted: No
PSEN op4H-s-30-150/1
- Humidity rating: 95 % r.h. at 40 °C
- Condensation permitted: No
- Vibration to standard: EN 60068-2-6
- Shock resistance: 10g
- Protection type standard: EN 60529
- Protection type, housing: [Missing information]
- Reaction time: 25 ms
PSEN op4B-4-120/1
- Ambient temperature: -10 to 55 °C
- Relative humidity: 95% at 50 °C
- Condensation: not allowed
- Vibration: according to EN 60068-2-6
- Impact resistance: 10g
- Degree of protection against dust and moisture: 2
- Degree of protection according to the standard: EN 60529
PSEN sc L 5.5 08-12
- Protection type, housing: IP65
- Supply voltage (V): 24 - 24 V DC
- Power consumption DC: 8 W
- Used wavelength range: 905 nm
PNOZ X3 110VAC 24VDC 3n/o 1n/c 1so
- Relay type: Semiconductor
- Operating mode: 1- or 2-channel
- Reset time: Max. 100 ms
PNOZ X8P 24 VDC 3n/o 2n/c 2so
- Maximum current: 2 A
- Trigger time: ≤ 20 ms
- Reset time: ≤ 20 ms
PSEN 2.1p-20/PSEN 2.1-20 /8mm/1unit (502220)
PSEN 1.1p-20/PSEN 1.1-20/8mm/ 1unit (504220)
PSEN 1.1p-22/PSEN 1.1-20/8mm/ix1/ 1unit (504222)
PSEN MA2.1P-10
PSEN ma2.1p-30/PSEN2.1-10/6mm/1unit (506407)
PSEN 2.1-10 / 1 actuator (512110)
PSEN cs1.1p / PSEN cs1.1 1 Unit (540000)
PSEN cs1.1p 1 switch (540050)
PSEN cs3.1n / PSEN cs3.1 1 Unit (541003)
PSEN cs3.1 M12/8-0.15m/PSEN cs3.1 1Unit (541009)
PSEN cs3.1p /PSEN cs3.1 1unit (541010)
PSEN cs3.1n 1switch (541053)