Pepperl+Fuchs NBN4-12GM50-E2-Y292473 Inductive sensor
Item Number: NBN4-12GM50-E2-Y292473
- 4 mm non-flush
- Overview
- Datasheet
- Alternative numbers
- Comments
| Operating current | 0 ... 200 mA |
| Connection assembly | AMP housing 282105-1 AMP crimp 282404-1 AMP sealing 281934-2 Schlemmer corrugated tube 1926304 Cable bushing: MTA 45.20921 |
| Scope of delivery | 2 self locking nuts in scope of delivery |
| Output polarity | DC |
| Voltage drop | 3 V |
| MTTFd | 990 a |
| Reduction factor r304 | 0.8 |
| Diagnostic Coverage (DC) | 0 % |
| Core cross-section | 0.34 mm2 |
| Switching frequency | 0 ... 1200 Hz |
| Reduction factor rCu | 0.4 |
| Output type | 3-wire |
| Repeat accuracy | 0.01 mm |
| UL approval | cULus Listed, General Purpose |
| Rated operating distance | 4 mm |
| Housing diameter | 12 mm |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Housing material | brass, nickel-plated |
| Assured operating distance | 0 ... 3.24 mm |
| Mission Time (TM) | 20 a |
| Degree of protection | IP67 |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Connection type | cable PVC , L1 = 395 mm , L2 = 280 mm |
| Hysteresis | typ. 5% |
| Short-circuit protection | pulsing |
| No-load supply current | 17 mA |
| Switching state indicator | LED, yellow |
| Reduction factor rAl | 0.5 |
| Installation | non-flush |
| Sensing face | PBT |
| Reverse polarity protection | reverse polarity protected |
| Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
| Operating voltage | 10 ... 30 V |
Comments
No comments yet