Pepperl+Fuchs NRB2-6,5S40-E2-V3 Inductive sensor
Item Number: NRB2-6,5S40-E2-V3
- Reduction factor = 1
- Magnetic field resistant
- Stainless steel housing
- Overview
- Datasheet
- Alternative numbers
- Comments
| Switching frequency | 0 ... 4000 Hz |
| No-load supply current | 15 mA |
| Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| MTTFd | 1010.5 a |
| Switching function | Normally open (NO) |
| Operating current | 0 ... 200 mA |
| Reduction factor r304 | 1 |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Storage temperature | -45 ... 85 В°C (-49 ... 185 В°F) |
| Reduction factor rSt37 | 1 |
| Degree of protection | IP67 |
| Constant magnetic field | 200 mT |
| Operating voltage | 10 ... 30 V |
| Rated operating distance | 2 mm |
| Sensing face | LCP , green |
| Alternating magnetic field | 200 mT |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Mission Time (TM) | 20 a |
| Assured operating distance | 0 ... 1.62 mm |
| Output type | PNP |
| Short-circuit protection | pulsing |
| Reduction factor rCu | 1 |
| Voltage drop | 2.5 V |
| Installation | flush |
| Diagnostic Coverage (DC) | 0 % |
| Reverse polarity protection | reverse polarity protected |
| UL approval | cULus Listed, General Purpose |
| Switching state indicator | Multihole-LED, yellow |
| Output type | 3-wire |
| Output polarity | DC |
| Connection type | Connector M8 x 1 , 3-pin |
| Reduction factor rAl | 1 |
| Hysteresis | type 5 % |
Comments
No comments yet