Pepperl+Fuchs OMT300-R200-2EP-IO-0,3M-V1-L

Distance sensor
Pepperl+Fuchs OMT300-R200-2EP-IO-0,3M-V1-L
Price on Request
One click request
Process data widthProcess data input 4 byte
Process data output 2 bits
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Light typemodulated visible red light
Repeat accuracy< 0.5 %
Voltage drop≤ 1.5 V DC
Connection300 mm fixed cable with M12 x 1, 4-pin connector
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Protection classIII
Mission Time (TM)20 a
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
IO-Link Revision1.1
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Switching currentmax. 100 mA , resistive load
Housing depth41.7 mm
Temperature drift0.05 %/K
Compatible master port typeA
Resolution0.1 mm
No-load supply current< 16 mA at 24 V supply voltage
Angle deviationmax. +/- 1.5 В°
Ripplemax. 10 %
Angle of divergenceapprox. 0.3 В°
Housing height50.6 mm
Communication interfaceIEC 61131-9
Device ID0x11190A (1120522)
Warm up time5 min
Diagnostic Coverage (DC)0 %
Interface typeIO-Link ( via C/Q = pin 4 )
Cable length0.3 m
Linearity error0.5 %
Usage categoryDC-12 and DC-13
Control elements5-step rotary switch for operating modes selection
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
SIO mode supportyes
Diameter of the light spotapprox. 3 mm at a distance of 300 mm
Min. cycle time3 ms
Ambient light limitEN 60947-5-2 : 45000 Lux
Transfer rateCOM 2 (38.4 kBaud)
Control elementsTeach-In key
Light sourcelaser diode
Degree of protectionIP67 / IP69 / IP69K
Massapprox. 45 g
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
CCC approvalCCC approval / marking not required for products rated ≤36 V
Measurement range100 ... 300 mm
Operating voltage10 ... 30 V DC
Response time2 ms
Laser safetyEN 60825-1:2014
Switching voltagemax. 30 V DC
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
MTTFd560 a
Housing width15 mm
Product standardEN 60947-5-2
Reference targetstandard white, 100 mm x 100 mm
in international format without spaces
All fields are required