Pepperl+Fuchs OMT300-R201-2EP-IO-0,3M-V31-L

Distance sensor
Pepperl+Fuchs OMT300-R201-2EP-IO-0,3M-V31-L
Price on Request
One click request
Response time2 ms
Temperature drift0.05 %/K
Switching voltagemax. 30 V DC
Housing depth41.7 mm
Device ID0x11191A (1120538)
Linearity error0.5 %
Transfer rateCOM 2 (38.4 kBaud)
Communication interfaceIEC 61131-9
Angle of divergenceapprox. 0.3 В°
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
Usage categoryDC-12 and DC-13
Housing height61.7 mm
Housing width15 mm
Diameter of the light spotapprox. 3 mm at a distance of 300 mm
IO-Link Revision1.1
Ripplemax. 10 %
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
MTTFd560 a
Light sourcelaser diode
Operating voltage10 ... 30 V DC
No-load supply current< 16 mA at 24 V supply voltage
CCC approvalCCC approval / marking not required for products rated ≤36 V
Mission Time (TM)20 a
Control elementsTeach-In key
Reference targetstandard white, 100 mm x 100 mm
Compatible master port typeA
Control elements5-step rotary switch for operating modes selection
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Laser safetyEN 60825-1:2014
Measurement range100 ... 300 mm
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Light typemodulated visible red light
Connectionfixed cable 300 mm with M8 x 1 male connector; 4-pin
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Warm up time5 min
Degree of protectionIP67 / IP69 / IP69K
Repeat accuracy< 0.5 %
Product standardEN 60947-5-2
Interface typeIO-Link ( via C/Q = pin 4 )
Resolution0.1 mm
Ambient light limitEN 60947-5-2 : 45000 Lux
Switching currentmax. 100 mA , resistive load
SIO mode supportyes
Angle deviationmax. +/- 1.5 В°
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Protection classIII
Massapprox. 51 g
Min. cycle time3 ms
Voltage drop≤ 1.5 V DC
Cable length0.3 m
Process data widthProcess data input 4 byte
Process data output 2 bits
Diagnostic Coverage (DC)0 %
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
in international format without spaces
All fields are required