Pepperl+Fuchs OMT300-R201-IEP-IO-0,3M-V1-L

Distance sensor
Pepperl+Fuchs OMT300-R201-IEP-IO-0,3M-V1-L
Price on Request
One click request
Connection300 mm fixed cable with M12 x 1, 4-pin connector
Output type1 current output: 4 ... 20 mA
CCC approvalCCC approval / marking not required for products rated ≤36 V
Angle of divergenceapprox. 0.3 В°
Massapprox. 55 g
Product standardEN 60947-5-2
Switching voltagemax. 30 V DC
Voltage drop≤ 1.5 V DC
IO-Link Revision1.1
Transfer rateCOM 2 (38.4 kBaud)
Reference targetstandard white, 100 mm x 100 mm
MTTFd470 a
Measurement range100 ... 300 mm
Ripplemax. 10 %
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Control elementsTeach-In key
SIO mode supportyes
Ambient light limitEN 60947-5-2 : 45000 Lux
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Process data widthProcess data input 4 byte
Process data output 2 bits
Housing width15 mm
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Operating voltage18 ... 30 V DC
Min. cycle time3 ms
Light sourcelaser diode
Device ID0x11191B (1120539)
Light typemodulated visible red light
Resolution0.1 mm
Load resistor> 1 kΩ voltage output ; ≤ 470 Ω current output
Housing height61.7 mm
Linearity error0.5 %
Compatible master port typeA
No-load supply current< 18 mA at 24 V supply voltage
Diameter of the light spotapprox. 3 mm at a distance of 300 mm
Switching currentmax. 100 mA , resistive load
Cable length0.3 m
Usage categoryDC-12 and DC-13
Degree of protectionIP67 / IP69 / IP69K
Angle deviationmax. +/- 1.5 В°
Mission Time (TM)20 a
Interface typeIO-Link ( via C/Q = pin 4 )
Temperature drift0.05 %/K
Ambient temperature10 ... 50 В°C (50 ... 122 В°F)
Diagnostic Coverage (DC)0 %
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Repeat accuracy< 0.5 %
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Communication interfaceIEC 61131-9
Response time2 ms
Protection classIII
Signal output1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
I—Pin2: analog output 4...20 mA
Laser safetyEN 60825-1:2014
Housing depth41.7 mm
Warm up time5 min
Control elements5-step rotary switch for operating modes selection
in international format without spaces
All fields are required