Pepperl+Fuchs OMT600-R200-EP-IO-0,3M-V3-L

Distance sensor
Pepperl+Fuchs OMT600-R200-EP-IO-0,3M-V3-L
Price on Request
One click request
Device ID0x111907 (1120519)
Switching voltagemax. 30 V DC
Voltage drop≤ 1.5 V DC
Interface typeIO-Link ( via C/Q = pin 4 )
Process data widthProcess data input 4 byte
Process data output 2 bits
Ambient light limitEN 60947-5-2 : 15000 Lux
Measurement range100 ... 600 mm
Temperature drift0.05 %/K
Resolution0.1 mm
Repeat accuracy< 1 %
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Control elementsTeach-In key
Mission Time (TM)20 a
Reference targetstandard white, 100 mm x 100 mm
Compatible master port typeA
CCC approvalCCC approval / marking not required for products rated ≤36 V
IO-Link Revision1.1
No-load supply current< 16 mA at 24 V supply voltage
Product standardEN 60947-5-2
Operating voltage10 ... 30 V DC
Usage categoryDC-12 and DC-13
Transfer rateCOM 2 (38.4 kBaud)
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Protection classIII
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
SIO mode supportyes
Massapprox. 41 g
Linearity error0.75 %
Laser safetyEN 60825-1:2014
Communication interfaceIEC 61131-9
Housing width15 mm
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Min. cycle time3 ms
Housing height50.6 mm
Response time2 ms
Connection300 mm fixed cable with M8 x 1, 3-pin connector
Ripplemax. 10 %
Diameter of the light spotapprox. 3 mm at a distance of 600 mm
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Diagnostic Coverage (DC)0 %
Housing depth41.7 mm
Angle of divergenceapprox. 0.3 В°
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
Cable length0.3 m
Angle deviationmax. +/- 1.5 В°
Light typemodulated visible red light
MTTFd560 a
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Control elements5-step rotary switch for operating modes selection
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Warm up time5 min
Light sourcelaser diode
Degree of protectionIP67 / IP69 / IP69K
Switching currentmax. 100 mA , resistive load
in international format without spaces
All fields are required