Pepperl+Fuchs OMT600-R200-UEP-IO-0,3M-V31-L

Distance sensor
Pepperl+Fuchs OMT600-R200-UEP-IO-0,3M-V31-L
Price on Request
One click request
SIO mode supportyes
Temperature drift0.05 %/K
Massapprox. 41 g
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Measurement range100 ... 600 mm
Diagnostic Coverage (DC)0 %
Device ID0x111909 (1120521)
Response time2 ms
Switching voltagemax. 30 V DC
Transfer rateCOM 2 (38.4 kBaud)
Signal output1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof
Control elementsTeach-In key
Connectionfixed cable 300 mm with M8 x 1 male connector; 4-pin
Compatible master port typeA
MTTFd470 a
Housing width15 mm
Ambient light limitEN 60947-5-2 : 15000 Lux
Reference targetstandard white, 100 mm x 100 mm
Cable length0.3 m
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
U—Pin2: analog output 0 ... 10 V
Linearity error0.75 %
Diameter of the light spotapprox. 3 mm at a distance of 600 mm
Ambient temperature10 ... 50 В°C (50 ... 122 В°F)
Angle of divergenceapprox. 0.3 В°
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Process data widthProcess data input 4 byte
Process data output 2 bits
Housing depth41.7 mm
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Interface typeIO-Link ( via C/Q = pin 4 )
CCC approvalCCC approval / marking not required for products rated ≤36 V
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Voltage drop≤ 1.5 V DC
Switching currentmax. 100 mA , resistive load
Control elements5-step rotary switch for operating modes selection
Ripplemax. 10 %
Laser safetyEN 60825-1:2014
IO-Link Revision1.1
Light sourcelaser diode
Mission Time (TM)20 a
Warm up time5 min
Housing height50.6 mm
Angle deviationmax. +/- 1.5 В°
Usage categoryDC-12 and DC-13
Repeat accuracy< 1 %
Protection classIII
Operating voltage18 ... 30 V DC
Light typemodulated visible red light
Load resistor> 1 kΩ voltage output ; ≤ 470 Ω current output
Communication interfaceIEC 61131-9
No-load supply current< 18 mA at 24 V supply voltage
Resolution0.1 mm
Degree of protectionIP67 / IP69 / IP69K
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Output type1 voltage output: 0 ... 10 V
Min. cycle time3 ms
Product standardEN 60947-5-2
in international format without spaces
All fields are required