Pepperl+Fuchs OMT600-R201-EP-IO-V3-L

Distance sensor
Pepperl+Fuchs OMT600-R201-EP-IO-V3-L
Price on Request
One click request
Diameter of the light spotapprox. 3 mm at a distance of 600 mm
Ambient temperature10 ... 60 В°C (50 ... 140 В°F)
Control elements5-step rotary switch for operating modes selection
Process data widthProcess data input 4 byte
Process data output 2 bits
Housing height61.7 mm
Interface typeIO-Link ( via C/Q = pin 4 )
No-load supply current< 16 mA at 24 V supply voltage
Temperature drift0.05 %/K
Mission Time (TM)20 a
Degree of protectionIP67 / IP69 / IP69K
Diagnostic Coverage (DC)0 %
Usage categoryDC-12 and DC-13
Angle of divergenceapprox. 0.3 В°
CCC approvalCCC approval / marking not required for products rated ≤36 V
Light typemodulated visible red light
ConnectionConnector plug, M8 x 1, 3 pin, rotatable by 90В°
Housing depth41.7 mm
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Reference targetstandard white, 100 mm x 100 mm
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Product standardEN 60947-5-2
Operating voltage10 ... 30 V DC
MTTFd560 a
SIO mode supportyes
Angle deviationmax. +/- 1.5 В°
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Switching voltagemax. 30 V DC
Protection classIII
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Measurement range100 ... 600 mm
Voltage drop≤ 1.5 V DC
Transfer rateCOM 2 (38.4 kBaud)
Ambient light limitEN 60947-5-2 : 15000 Lux
Massapprox. 35 g
Device ID0x111917 (1120535)
Control elementsTeach-In key
Response time2 ms
Min. cycle time3 ms
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
IO-Link Revision1.1
Warm up time5 min
Ripplemax. 10 %
Housing width15 mm
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Repeat accuracy< 1 %
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Linearity error0.75 %
Communication interfaceIEC 61131-9
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Compatible master port typeA
Laser safetyEN 60825-1:2014
Switching currentmax. 100 mA , resistive load
Light sourcelaser diode
Resolution0.1 mm
in international format without spaces
All fields are required