Pepperl+Fuchs OQT350-R200-2EP-IO-0,3M-V1-L

Triangulation sensor (SbR)
Pepperl+Fuchs OQT350-R200-2EP-IO-0,3M-V1-L
Price on Request
One click request
Degree of protectionIP67 / IP69 / IP69K
Control elements5-step rotary switch for operating modes selection
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Process data widthProcess data input 2 Bit
Process data output 2 Bit
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Min. cycle time2.3 ms
Light typemodulated visible red light
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Protection classIII
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Switching voltagemax. 30 V DC
Diameter of the light spotapprox. 3 mm at a distance of 350 mm
Detection range max.40 ... 400 mm
Compatible master port typeA
Switching frequency217 Hz
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Black/White difference (6 %/90 %)< 2 %
Communication interfaceIEC 61131-9
Operating voltage10 ... 30 V DC
Reference targetstandard white, 100 mm x 100 mm
MTTFd560 a
Product standardEN 60947-5-2
Interface typeIO-Link ( via C/Q = pin 4 )
Ripplemax. 10 %
Housing height50.6 mm
Ambient light limitEN 60947-5-2 : 45000 Lux
Detection range60 ... 350 mm
Housing depth41.7 mm
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-20 ... 60 В°C (-4 ... 140 В°F) , movable cable not appropriate for conveyor chains
Diagnostic Coverage (DC)0 %
Device profileIdentification and diagnosis
Smart Sensor type 0
Massapprox. 45 g
Detection range min.60 ... 100 mm
Control elementsTeach-In key
No-load supply current< 16 mA at 24 V supply voltage
Angle of divergenceapprox. 0.3 В°
Housing width15 mm
Cable length0.3 m
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
Laser safetyEN 60825-1:2014
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Transfer rateCOM 2 (38.4 kBaud)
Voltage drop≤ 1.5 V DC
Device ID0x111802 (1120258)
IO-Link Revision1.1
CCC approvalCCC approval / marking not required for products rated ≤36 V
SIO mode supportyes
Switching currentmax. 100 mA , resistive load
Connection300 mm fixed cable with M12 x 1, 4-pin connector
Usage categoryDC-12 and DC-13
Response time2.3 ms
Mission Time (TM)20 a
Light sourcelaser diode
Adjustment range100 ... 350 mm
in international format without spaces
All fields are required