Pepperl+Fuchs OQT350-R201-2EP-IO-0,3M-V31-L

Triangulation sensor (SbR)
Pepperl+Fuchs OQT350-R201-2EP-IO-0,3M-V31-L
Price on Request
One click request
Compatible master port typeA
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed cable
-20 ... 60 В°C (-4 ... 140 В°F) , movable cable not appropriate for conveyor chains
Device profileIdentification and diagnosis
Smart Sensor type 0
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Min. cycle time2.3 ms
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Black/White difference (6 %/90 %)< 2 %
Housing depth41.7 mm
Massapprox. 51 g
Light sourcelaser diode
Switching voltagemax. 30 V DC
SIO mode supportyes
Product standardEN 60947-5-2
Mission Time (TM)20 a
Degree of protectionIP67 / IP69 / IP69K
Laser safetyEN 60825-1:2014
Reference targetstandard white, 100 mm x 100 mm
Operating voltage10 ... 30 V DC
CCC approvalCCC approval / marking not required for products rated ≤36 V
Angle of divergenceapprox. 0.3 В°
Housing height61.7 mm
Detection range60 ... 350 mm
Transfer rateCOM 2 (38.4 kBaud)
Adjustment range100 ... 350 mm
MTTFd560 a
FDA approvalIEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Detection range min.60 ... 100 mm
Usage categoryDC-12 and DC-13
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Detection range max.40 ... 400 mm
Light typemodulated visible red light
Communication interfaceIEC 61131-9
Control elementsTeach-In key
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Response time2.3 ms
Switching currentmax. 100 mA , resistive load
No-load supply current< 16 mA at 24 V supply voltage
Diameter of the light spotapprox. 3 mm at a distance of 350 mm
Interface typeIO-Link ( via C/Q = pin 4 )
Diagnostic Coverage (DC)0 %
IO-Link Revision1.1
Switching frequency217 Hz
Housing width15 mm
Protection classIII
Ambient light limitEN 60947-5-2 : 45000 Lux
Control elements5-step rotary switch for operating modes selection
Process data widthProcess data input 2 Bit
Process data output 2 Bit
Device ID0x111812 (1120274)
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
Voltage drop≤ 1.5 V DC
Cable length0.3 m
Ripplemax. 10 %
Connectionfixed cable 300 mm with M8 x 1 male connector; 4-pin
in international format without spaces
All fields are required