- Leakage of parasetical shaft currents
- Blind hollow shaft Diam.16...30 mm
The MF series of products from Univer Group: reliability and efficiency in every detail
| Valve function | 5/2-way, monostable |
| Standard nominal flow rate (standardised to DIN 1343) | 1200 l/min |
| Pneumatic connection, port 1 | Sub-base size 1 to ISO 5599-1 |
Cylinder sensor, Metal thread, M12 x 1, DC PNP, Pressure rating, Detects ferrous metals, Connector, Sensing range 1.8 mm [f]
MFB3002BBPKG/B/500/0,12M/ZH/DT
MHAD 50 - HDmag
- Absolute encoder, 1 or 2 sensing head
- Absolute encoder with magnetic sensing and without bearings
- Absolute resolution max. 16 bit singleturn
- Protection IP 67
- Large tolerances: axial ±1 mm, radial max. 1 mm
MHAP 100 - HDmag
- Absolute encoder
- Singleturn 8...17 Bit
- Magnetic sensing
- Through hollow shaft max. diam 80 mm
HDmag MHAP 200
- Sensor head: FPGA signal processing
- Type: Absolute encoder
- Resolution: 8...17 bits (single rotary)
- Maximum diameter of the hollow shaft: 180 mm
MHAP 400 - HDmag
- Absolute encoder with magnetic sensing and without bearings
- Sensor head with integrated FPGA signal processing
- Absolute resolution max. 17 bit singleturn
- Additional incremental output
- Electronics is fully encapsulated
- Large tolerances: axial ±1 mm, radial max. 0.5 mm
- Simple mounting, easy adaptation
- MHC2
- Air Gripper
- Angular Style
- MHC2
- Air Gripper
- Angular Style
- MHC2
- Air Gripper
- Angular Style
Festo MH2
| Valve function | 5/2-way, monostable |
| Standard nominal flow rate (standardised to DIN 1343) | 90 l/min |
| Pneumatic connection, port 1 | QS-4 |
AC asynchronous motor MXXMA Z1
- Operating mode: S1 (continuous)
- Cooling type: IC01 (self-cooling)
- Bearings: SKF
- Housing material: Aluminum
- Shaft material: Steel
- MHF2
- Air Gripper
- 2 Finger
- Low Profile
- MHF2
- Air Gripper
- 2 Finger
- Low Profile
- MHF2
- Air Gripper
- 2 Finger
- Low Profile
Asynchronous motor
Engine 15621060
HDmag MHGE 100 Encoders without bearings - incremental
- Robust and wearless
- High protection through fully encapsulated electronics
- Large tolerances: axial ±3 mm, radial max. 2.2 mm
- Very compact dimensions
- Robust and wearless
- High protection through fully encapsulated electronics
- Large tolerances: axial В±3 mm, radial max. 2.2 mm
- Very compact dimensions
- Simple mounting, easy adaptation
- Robust and wearless
- High protection through fully encapsulated electronics
- Large tolerances: axial В±3 mm, radial max. 2.2 mm
- Very compact dimensions
- Simple mounting, easy adaptation
HDmag MHGP 200 Encoders without bearings - incremental
- Sensor head with integrated FPGA signal processing / Magnetic sensing
- Robust and wearless
- Electronics is fully encapsulated, high protection
- Large tolerances: axial ±3 mm, radial max. 2.2 mm
- Very compact dimensions
- Simple mounting, easy adaptation
- Several mounting possibilities
MHGP 100 Encoders without bearings - incremental
- Axial tolerance: ±3 mm
- Radial tolerance: 0.1...2.2 mm
- Degree of protection: IP 67
- Operating temperature: -20...+85 °C
- Material: Housing - aluminum alloy, wheel - stainless steel
- MHL2
- Air Gripper
- Parallel Style
- Wide Opening
- MHL2
- Air Gripper
- Parallel Style
- Wide Opening
- MHL2
- Air Gripper
- Parallel Style
- Wide Opening
art. 10136428
- cable FEP, 2 m
- -40 ... 120 В°C